I fist bought the plans when I was about 12. 50years later I decided to build the boat. it took me about 6months to build. The plans are the original Sufury but with a few changes. The cockpit is similar to that of a cigarette boat, extended the length and added a duck board. The power plant is 2100kv brushless moter, a 120amp speed control, 4mm flex sharftwith 2 11.4volt lipo batteries. in a straight line the boat is fast, but she really leans over when turning. Such is life is fun to drive.

Built from a Linkspan Model boat kit, with deck lighting and passengers and crew, sailed at St Georges Park, Kingswinford, West Midlands by Kingswinford Model Boat Club

I first started to build this boat with my father when I was about 15 . Then at about 45 I decided to compleat the build. it originally was built to have a Ed diesele engine,but was to costly to run so I changed to electric power. This proved to be the right decision. The boat runs wel, but when I turn on the full power it tends to lean to starboard and cavatat so I have learned not to put on full power. The sea Commander is a pleasure to drive.

A nice day spent on the pool with Pride Of Hythe. This is her first run with passengers and cars on board😊.

Scratch built by master Ivve in 1:5 scale, Tumlaren designed by Knud H Reimers and said to be one of the most beatuful sailing yachts in the world😁

Our club had our Fun Run today.We operate out of Humber Bay in Toronto whilr the weeds are down.The sun is finally cooperating.
We have two ponds to run our boats in.The Sailors run in the big pond and the scale members run in the smaller pond.Attached are a few photos of the day.I must mention that the first picture is a new construction of a Marblehead out for a test run.The Canadian Coast Guard Ice breaker is totally scratch built with working radar and lights.This member works on his kitchen table.We found out later that he was born on a kitchen table.

finally some nice weather for a sail boat race at Hamilton sod farm pond . May 20 2018 my soling is the last in line & has a watermelon deck or maybe it's salmon

scratch built old Vic Smeed plan. needs either bigger motor or more pitch. should go better once it gets on the step

It was such a beautiful morning,a friend and I decided to go for the first sail of the year.Had to wait for the swans and ducks to clear.

Shots from the Chichester Canal RC Boat Run 2018. A bit of an endurance run and all except my galleon made it. Mine decided to not be attached to the prop shaft after a bit. Several children took part and several of the local clubs were there to enjoy the sunshine and company

Model Yacht Nautic from Grapner.
The hull is not original but is made of laminate. The deck is made of mahogany strips.
The boat engine is a MIG 480 powered by a Lipol 7,4V 5000mAh battery.

A short video of the first trial of my Genesis 9000 Offshore Power Boat. This is a boat to use whilst I build others.
The trial was seriously hampered by a faulty main switch. The insides must have fallen apart during transportation. I did manage to get an electrical contact to get around five minutes of the trial. The boat ran well but I will have to adjust the rudder to give more movement. Just after the video ended, the boat hit a ripple whilst turning and flipped over. No water entered the hull so all was good, except the switch now refused to work at all. The trial was ended and unfortunately will now have to wait until I return to my river in August.😤