Showing results for “working monitor”
· Clear search
Search results
10 posts
Scratch Built 1:32 scale Dover Harbour Board Tug, DHB Doughty.
The main hull is a standard Damen hull purchased from Mobile Marine Models, see their website for Portgarth.
the hull is fitted with 2 x T12 Motors for the main propulsion,2 x 60 degree kort nozzles for steering, with 2 x purpose made brass props.
Also fitted is a 12v Graupner water pump for the working fire monitor and Fwd spray bar, 2 x Mtronks 15 amp ESC's, Futaba steering servo and Futaba 40 MHz Receiver.
Approx Dimensions including fendering Loa 41" Beam 14"
{"text":"Scratch Built 1:32 scale Dover Harbour Board Tug, DHB Doughty. \nThe main hull is a standard Damen hull purchased from Mobile Marine Models, see their website for Portgarth.\nthe hull is fitted with 2 x T12 Motors for the main propulsion,2 x 60 degree kort nozzles for steering, with 2 x purpose made brass props.\nAlso fitted is a 12v Graupner water pump for the working fire monitor and Fwd spray bar, 2 x Mtronks 15 amp ESC's, Futaba steering servo and Futaba 40 MHz Receiver.\nApprox Dimensions including fendering Loa 41\" Beam 14\"","subject":"Tug 'DHB Dauntless'","media":[],"youtubeUrl":"https://www.youtube.com/watch?v=wd5ntjuesVQ"}
Scratch Built 1:32 scale Dover Harbour Board Tug, DHB Doughty.
The main hull is a standard Damen hull purchased from Mobile Marine Models, see their website for Portgarth.
the hull is fitted with 2 x T12 Motors for the main propulsion,2 x 60 degree kort nozzles for steering, with 2 x purpose made brass props.
Also fitted is a 12v Graupner water pump for the working fire monitor and Fwd spray bar, 2 x Mtronks 15 amp ESC's, Futaba steering servo and Futaba 40 MHz Receiver.
Approx Dimensions including fendering Loa 41" Beam 14"
Modified HegI Fairplay V tug built by My late Father. Mods include bigger 65mm Prop in a brass kort nozzle, working fire monitors, lights, radar, engine sound and grappling hooks to rescue nitro boats. Built 1980-81.
{"text":"Modified HegI Fairplay V tug built by My late Father. Mods include bigger 65mm Prop in a brass kort nozzle, working fire monitors, lights, radar, engine sound and grappling hooks to rescue nitro boats. Built 1980-81.","subject":"Fairplay","media":[{"id":"1457103898","name":"1457103898.jpg","caption":"","url":"https://beta.model-boats.com/media/1457103898/l","thumbUrl":"https://beta.model-boats.com/media/1457103898/s","isImage":true,"ext":"jpg"},{"id":"1457103912","name":"1457103912.jpg","caption":"","url":"https://beta.model-boats.com/media/1457103912/l","thumbUrl":"https://beta.model-boats.com/media/1457103912/s","isImage":true,"ext":"jpg"},{"id":"1457104043","name":"1457104043.jpg","caption":"","url":"https://beta.model-boats.com/media/1457104043/l","thumbUrl":"https://beta.model-boats.com/media/1457104043/s","isImage":true,"ext":"jpg"},{"id":"1457104059","name":"1457104059.jpg","caption":"","url":"https://beta.model-boats.com/media/1457104059/l","thumbUrl":"https://beta.model-boats.com/media/1457104059/s","isImage":true,"ext":"jpg"}],"youtubeUrl":""}
Modified HegI Fairplay V tug built by My late Father. Mods include bigger 65mm Prop in a brass kort nozzle, working fire monitors, lights, radar, engine sound and grappling hooks to rescue nitro boats. Built 1980-81.
Restoring my 46 inch fire boat bought from ebay currently stripping it back as paint was letting it down was running a graupner 600 turbo motor but changing and adding sound module and working fire monitors.
{"text":"Restoring my 46 inch fire boat bought from ebay currently stripping it back as paint was letting it down was running a graupner 600 turbo motor but changing and adding sound module and working fire monitors.","subject":"aerokits","media":[{"id":"1410207616","name":"1410207616.jpg","caption":"","url":"https://beta.model-boats.com/media/1410207616/l","thumbUrl":"https://beta.model-boats.com/media/1410207616/s","isImage":true,"ext":"jpg"},{"id":"1410207675","name":"1410207675.jpg","caption":"","url":"https://beta.model-boats.com/media/1410207675/l","thumbUrl":"https://beta.model-boats.com/media/1410207675/s","isImage":true,"ext":"jpg"},{"id":"1410207714","name":"1410207714.jpg","caption":"","url":"https://beta.model-boats.com/media/1410207714/l","thumbUrl":"https://beta.model-boats.com/media/1410207714/s","isImage":true,"ext":"jpg"},{"id":"1410207765","name":"1410207765.jpg","caption":"","url":"https://beta.model-boats.com/media/1410207765/l","thumbUrl":"https://beta.model-boats.com/media/1410207765/s","isImage":true,"ext":"jpg"}],"youtubeUrl":""}
Restoring my 46 inch fire boat bought from ebay currently stripping it back as paint was letting it down was running a graupner 600 turbo motor but changing and adding sound module and working fire monitors.
built this one after the first one was stolen which has turned out for the better. Has working fire monitors,anchor,bow thruster,sounds,searchlight,lightsand a bloke on the back having a wee, which in turn acts as a bilge pump to tell me there is water in the boat
{"text":"built this one after the first one was stolen which has turned out for the better. Has working fire monitors,anchor,bow thruster,sounds,searchlight,lightsand a bloke on the back having a wee, which in turn acts as a bilge pump to tell me there is water in the boat","subject":"dusseldorf fireboat","media":[{"id":"1406321536","name":"1406321536.jpg","caption":"","url":"https://beta.model-boats.com/media/1406321536/l","thumbUrl":"https://beta.model-boats.com/media/1406321536/s","isImage":true,"ext":"jpg"}],"youtubeUrl":""}
built this one after the first one was stolen which has turned out for the better. Has working fire monitors,anchor,bow thruster,sounds,searchlight,lightsand a bloke on the back having a wee, which in turn acts as a bilge pump to tell me there is water in the boat
Hi I am just starting to build a Vosper fire tender using Robbe fire moniotrs. I already nixed the vertical motion but is there any other recommendations you would make before I go any further?
Thanks
Martin
Hi I am just starting to build a Vosper fire tender using Robbe fire moniotrs. I already nixed the vertical motion but is there any other recommendations you would make before I go any further?
Thanks
Martin
This is a Kitshack 46 inch Crash Tender. Nearly finished with a bit more detail yet to finish powered by 2 1400 kv brushless motors running on car speed controllers at 7.2 volt. Goes like stink! Has working rotatable fire monitors which are scratch built
{"text":"This is a Kitshack 46 inch Crash Tender. Nearly finished with a bit more detail yet to finish powered by 2 1400 kv brushless motors running on car speed controllers at 7.2 volt. Goes like stink! Has working rotatable fire monitors which are scratch built","subject":"RAF Crash Tender","media":[{"id":"1402145493","name":"1402145493.jpg","caption":"","url":"https://beta.model-boats.com/media/1402145493/l","thumbUrl":"https://beta.model-boats.com/media/1402145493/s","isImage":true,"ext":"jpg"},{"id":"1402145526","name":"1402145526.jpg","caption":"","url":"https://beta.model-boats.com/media/1402145526/l","thumbUrl":"https://beta.model-boats.com/media/1402145526/s","isImage":true,"ext":"jpg"},{"id":"1402145549","name":"1402145549.jpg","caption":"","url":"https://beta.model-boats.com/media/1402145549/l","thumbUrl":"https://beta.model-boats.com/media/1402145549/s","isImage":true,"ext":"jpg"},{"id":"1402145577","name":"1402145577.jpg","caption":"","url":"https://beta.model-boats.com/media/1402145577/l","thumbUrl":"https://beta.model-boats.com/media/1402145577/s","isImage":true,"ext":"jpg"}],"youtubeUrl":""}
This is a Kitshack 46 inch Crash Tender. Nearly finished with a bit more detail yet to finish powered by 2 1400 kv brushless motors running on car speed controllers at 7.2 volt. Goes like stink! Has working rotatable fire monitors which are scratch built
It looks great - I am just starting to build one. Do you have any recommendations on the fire monitors? I am going to use Robbe and make them rotate.
Do you find the twin motors too much ?
It looks great - I am just starting to build one. Do you have any recommendations on the fire monitors? I am going to use Robbe and make them rotate.
Do you find the twin motors too much ?
I made my own from bits of tube and old coins for flanges. The nozzle is just sleeved down with progressively smaller tube till it squirted about right. Pump is a standard grapnel unit. Hopefully this link to a photo blog will work. https://picasaweb.google.com/102817163504371499744/RAFCrashTenderModelBoatBuildKitshack46InchVersion
The link will give you details of the motors and speed controllers and the props I used. it's quick!
I made my own from bits of tube and old coins for flanges. The nozzle is just sleeved down with progressively smaller tube till it squirted about right. Pump is a standard grapnel unit. Hopefully this link to a photo blog will work. https://picasaweb.google.com/102817163504371499744/RAFCrashTenderModelBoatBuildKitshack46InchVersion
The link will give you details of the motors and speed controllers and the props I used. it's quick!
Hi, this is Hercules 51" L 14" Beam was scratched built
12 years ago . it's powered by 2 robbie 1000 off a 12v
battery with a vantec ESC . it has a working fire monitor
2 sound systems with 2 -4" Kort Nozzels .
It is all planked by Cherry veneer deck and superstructure
It olso has working lights for the night runs.
I run this tug evry weekend for the past 10 years and it
still looks new . I live in Whitestone NEW York and I
belong to the Empire State Model Mariners Club .
Check us out at Empire State Model Mariners RC Groups
I am Band1.
{"text":"Hi, this is Hercules 51\" L 14\" Beam was scratched built \n12 years ago . it's powered by 2 robbie 1000 off a 12v\nbattery with a vantec ESC . it has a working fire monitor\n2 sound systems with 2 -4\" Kort Nozzels . \nIt is all planked by Cherry veneer deck and superstructure\nIt olso has working lights for the night runs.\nI run this tug evry weekend for the past 10 years and it\nstill looks new . I live in Whitestone NEW York and I \nbelong to the Empire State Model Mariners Club .\nCheck us out at Empire State Model Mariners RC Groups\nI am Band1.","subject":"Hercules","media":[{"id":"1373083692","name":"1373083692.jpg","caption":"","url":"https://beta.model-boats.com/media/1373083692/l","thumbUrl":"https://beta.model-boats.com/media/1373083692/s","isImage":true,"ext":"jpg"},{"id":"1373083169","name":"1373083169.jpg","caption":"","url":"https://beta.model-boats.com/media/1373083169/l","thumbUrl":"https://beta.model-boats.com/media/1373083169/s","isImage":true,"ext":"jpg"},{"id":"1373083122","name":"1373083122.jpg","caption":"","url":"https://beta.model-boats.com/media/1373083122/l","thumbUrl":"https://beta.model-boats.com/media/1373083122/s","isImage":true,"ext":"jpg"},{"id":"1373083077","name":"1373083077.jpg","caption":"","url":"https://beta.model-boats.com/media/1373083077/l","thumbUrl":"https://beta.model-boats.com/media/1373083077/s","isImage":true,"ext":"jpg"}],"youtubeUrl":""}
Hi, this is Hercules 51" L 14" Beam was scratched built
12 years ago . it's powered by 2 robbie 1000 off a 12v
battery with a vantec ESC . it has a working fire monitor
2 sound systems with 2 -4" Kort Nozzels .
It is all planked by Cherry veneer deck and superstructure
It olso has working lights for the night runs.
I run this tug evry weekend for the past 10 years and it
still looks new . I live in Whitestone NEW York and I
belong to the Empire State Model Mariners Club .
Check us out at Empire State Model Mariners RC Groups
I am Band1.
This is my 46 inch fireboat. it is a 1960s Aerokits model that I was given about 18 months ago only partly started (frames and stringers). it is powered by 2 x 770 watt brushless motors with 4s lips and has working monitors and an Action Noisy Thing sound system. it is pictured here at Tynemouth boating lake where I an a member to of the Tmbc.
{"text":"This is my 46 inch fireboat. it is a 1960s Aerokits model that I was given about 18 months ago only partly started (frames and stringers). it is powered by 2 x 770 watt brushless motors with 4s lips and has working monitors and an Action Noisy Thing sound system. it is pictured here at Tynemouth boating lake where I an a member to of the Tmbc.","subject":"46 Inch Aerokits","media":[{"id":"1334347688","name":"1334347688.jpg","caption":"","url":"https://beta.model-boats.com/media/1334347688/l","thumbUrl":"https://beta.model-boats.com/media/1334347688/s","isImage":true,"ext":"jpg"},{"id":"1334347629","name":"1334347629.jpg","caption":"","url":"https://beta.model-boats.com/media/1334347629/l","thumbUrl":"https://beta.model-boats.com/media/1334347629/s","isImage":true,"ext":"jpg"},{"id":"1334347587","name":"1334347587.jpg","caption":"","url":"https://beta.model-boats.com/media/1334347587/l","thumbUrl":"https://beta.model-boats.com/media/1334347587/s","isImage":true,"ext":"jpg"}],"youtubeUrl":""}
This is my 46 inch fireboat. it is a 1960s Aerokits model that I was given about 18 months ago only partly started (frames and stringers). it is powered by 2 x 770 watt brushless motors with 4s lips and has working monitors and an Action Noisy Thing sound system. it is pictured here at Tynemouth boating lake where I an a member to of the Tmbc.
I'll get some pictures when I next see it as it is kept at my Mums place in the NE where the lake at the Tynemouth club is big enough to take it given its speed and size. if you are blowing fuses, make sure you haven't over greased the shaft. I did that once and really only a light greasing of the inner shaft and some light oil on the bearings is all that is required. Also try a smaller prop. You may not get any reduction in Speer as the motor may rev faster and at lower amps. I've just taken the 50mm 3 blade brass props off mine and put 45mm 2 blade plastic racing props on and she runs faster and smoother. Hope this helps.
I'll get some pictures when I next see it as it is kept at my Mums place in the NE where the lake at the Tynemouth club is big enough to take it given its speed and size. if you are blowing fuses, make sure you haven't over greased the shaft. I did that once and really only a light greasing of the inner shaft and some light oil on the bearings is all that is required. Also try a smaller prop. You may not get any reduction in Speer as the motor may rev faster and at lower amps. I've just taken the 50mm 3 blade brass props off mine and put 45mm 2 blade plastic racing props on and she runs faster and smoother. Hope this helps.
HI to all you Fire Boaters,
I have decided to finally bring my Fireboat out of the closet and up for inspection.
This is the first of my many boats I am showing, I will probably show others in the future.
I started to build her back in 2006 after being off work and having a shoulder operation. She was not going to be a R/C boat, just a bit of something to do whilst on recovery.
I have a 34" still in the box unmade, purchased back in 1994 from Aerokits.
I drew round all the parts and then shrunk them on my scanner. She is 27" long I think that's
just fraction over 1/20th scale . She is almost all balsa except the 2 under skins that are balsa laminated with 1/64th ply. The hand rails are 1/4" balsa blocks I cut from a strip and the rail is ally tubing.
The mast is made from plastic strip from packets from the model shop.
When I returned to work she was put into the shed and left unfinished.
I stumbled across the Fireboat website and registered in 2009 when I was off work once again. This then made me think more about working on her again and I decide to turn her into an R/C model. So out she came and I fitted an Electomax Delta 480bb motor and a M3sonik esc.
I also purchased a couple of Robbe fire monitors, put them together shortening the nozzles and cutting the bottom of the base of to try to look a bit moreto scale. I know they are not the correct type but if I want to go down the road of getting them working then these ones will.
Then off I went to Wilkinson's and bought some paint. Then set out to paint her, as I brushed on the paint it seemed to be drying almost as quick as I was painting her. Dragging the paint I had just put on with next brush stroke. What a TOTAL DISASTER !!. I gave up on her and back into the shed she went.
2010 arrived I started again rubbed the paint down a bit and bought some Tamiya spray acrylic and started spraying, underside red, it seemed look all right. I used a nice new roll of low tack masking tape, taped up the underside and the decking and sprayed on the black on the sides. I thought that look all right. Took off the masking tape, which also took off the red paint and the dope from the decks. Another DISASTER. Back in the shed she went once again.
A couple of months went by and I was up in Norfolk on my own boat and watching the workers in the boatyard, ideas came to me and when we returned home, out she came and I repainted the sides
and then with red oxide paint I painted her undersides to make it look like antI foul paint. I used some white stripe to cover the join of the two different paint colours.
I had bought some roundels in Anglia Model Shop in Gorleston and some lettering in a shop in Norwich and after painting put these on.
Not looking fantastic but passable I was a little happier with her, but still not satisfied, back in the shed she went again.
Now after so much nagging from my brother out she has come, I've started again. He talked me into changing and trying a brushless motor and a smaller esc he had in his tool box from his helicopter he was shelving as its rota head was damaged beyond repair.
I have now fitted them and if they work I will change the esc to a forward/ reverse esc in the future at some point.
Sea trials are still away off more than likely in the spring, because the decking has yet to be painted. That will be the next job.
I think that's all for now, as I have probably bored you all to tears. I hope update as I progress further.
Just to let you know I'm Tom (alias BOATSHED).
{"text":"HI to all you Fire Boaters,\n I have decided to finally bring my Fireboat out of the closet and up for inspection.\nThis is the first of my many boats I am showing, I will probably show others in the future.\nI started to build her back in 2006 after being off work and having a shoulder operation. She was not going to be a R/C boat, just a bit of something to do whilst on recovery.\n\n I have a 34\" still in the box unmade, purchased back in 1994 from Aerokits.\nI drew round all the parts and then shrunk them on my scanner. She is 27\" long I think that's\njust fraction over 1/20th scale . She is almost all balsa except the 2 under skins that are balsa laminated with 1/64th ply. The hand rails are 1/4\" balsa blocks I cut from a strip and the rail is ally tubing.\n The mast is made from plastic strip from packets from the model shop.\n\nWhen I returned to work she was put into the shed and left unfinished. \n I stumbled across the Fireboat website and registered in 2009 when I was off work once again. This then made me think more about working on her again and I decide to turn her into an R/C model. So out she came and I fitted an Electomax Delta 480bb motor and a M3sonik esc.\nI also purchased a couple of Robbe fire monitors, put them together shortening the nozzles and cutting the bottom of the base of to try to look a bit moreto scale. I know they are not the correct type but if I want to go down the road of getting them working then these ones will. \n\nThen off I went to Wilkinson's and bought some paint. Then set out to paint her, as I brushed on the paint it seemed to be drying almost as quick as I was painting her. Dragging the paint I had just put on with next brush stroke. What a TOTAL DISASTER !!. I gave up on her and back into the shed she went.\n\n 2010 arrived I started again rubbed the paint down a bit and bought some Tamiya spray acrylic and started spraying, underside red, it seemed look all right. I used a nice new roll of low tack masking tape, taped up the underside and the decking and sprayed on the black on the sides. I thought that look all right. Took off the masking tape, which also took off the red paint and the dope from the decks. Another DISASTER. Back in the shed she went once again. \n \nA couple of months went by and I was up in Norfolk on my own boat and watching the workers in the boatyard, ideas came to me and when we returned home, out she came and I repainted the sides \nand then with red oxide paint I painted her undersides to make it look like antI foul paint. I used some white stripe to cover the join of the two different paint colours.\n I had bought some roundels in Anglia Model Shop in Gorleston and some lettering in a shop in Norwich and after painting put these on. \n Not looking fantastic but passable I was a little happier with her, but still not satisfied, back in the shed she went again.\n\nNow after so much nagging from my brother out she has come, I've started again. He talked me into changing and trying a brushless motor and a smaller esc he had in his tool box from his helicopter he was shelving as its rota head was damaged beyond repair.\n I have now fitted them and if they work I will change the esc to a forward/ reverse esc in the future at some point.\n\nSea trials are still away off more than likely in the spring, because the decking has yet to be painted. That will be the next job.\n\n I think that's all for now, as I have probably bored you all to tears. I hope update as I progress further.\n Just to let you know I'm Tom (alias BOATSHED).","subject":"RAF Crash Tender","media":[{"id":"1325862096","name":"1325862096.jpg","caption":"","url":"https://beta.model-boats.com/media/1325862096/l","thumbUrl":"https://beta.model-boats.com/media/1325862096/s","isImage":true,"ext":"jpg"},{"id":"1325862083","name":"1325862083.jpg","caption":"","url":"https://beta.model-boats.com/media/1325862083/l","thumbUrl":"https://beta.model-boats.com/media/1325862083/s","isImage":true,"ext":"jpg"},{"id":"1325862040","name":"1325862040.jpg","caption":"","url":"https://beta.model-boats.com/media/1325862040/l","thumbUrl":"https://beta.model-boats.com/media/1325862040/s","isImage":true,"ext":"jpg"},{"id":"1325862015","name":"1325862015.jpg","caption":"","url":"https://beta.model-boats.com/media/1325862015/l","thumbUrl":"https://beta.model-boats.com/media/1325862015/s","isImage":true,"ext":"jpg"}],"youtubeUrl":""}
HI to all you Fire Boaters,
I have decided to finally bring my Fireboat out of the closet and up for inspection.
This is the first of my many boats I am showing, I will probably show others in the future.
I started to build her back in 2006 after being off work and having a shoulder operation. She was not going to be a R/C boat, just a bit of something to do whilst on recovery.
I have a 34" still in the box unmade, purchased back in 1994 from Aerokits.
I drew round all the parts and then shrunk them on my scanner. She is 27" long I think that's
just fraction over 1/20th scale . She is almost all balsa except the 2 under skins that are balsa laminated with 1/64th ply. The hand rails are 1/4" balsa blocks I cut from a strip and the rail is ally tubing.
The mast is made from plastic strip from packets from the model shop.
When I returned to work she was put into the shed and left unfinished.
I stumbled across the Fireboat website and registered in 2009 when I was off work once again. This then made me think more about working on her again and I decide to turn her into an R/C model. So out she came and I fitted an Electomax Delta 480bb motor and a M3sonik esc.
I also purchased a couple of Robbe fire monitors, put them together shortening the nozzles and cutting the bottom of the base of to try to look a bit moreto scale. I know they are not the correct type but if I want to go down the road of getting them working then these ones will.
Then off I went to Wilkinson's and bought some paint. Then set out to paint her, as I brushed on the paint it seemed to be drying almost as quick as I was painting her. Dragging the paint I had just put on with next brush stroke. What a TOTAL DISASTER !!. I gave up on her and back into the shed she went.
2010 arrived I started again rubbed the paint down a bit and bought some Tamiya spray acrylic and started spraying, underside red, it seemed look all right. I used a nice new roll of low tack masking tape, taped up the underside and the decking and sprayed on the black on the sides. I thought that look all right. Took off the masking tape, which also took off the red paint and the dope from the decks. Another DISASTER. Back in the shed she went once again.
A couple of months went by and I was up in Norfolk on my own boat and watching the workers in the boatyard, ideas came to me and when we returned home, out she came and I repainted the sides
and then with red oxide paint I painted her undersides to make it look like antI foul paint. I used some white stripe to cover the join of the two different paint colours.
I had bought some roundels in Anglia Model Shop in Gorleston and some lettering in a shop in Norwich and after painting put these on.
Not looking fantastic but passable I was a little happier with her, but still not satisfied, back in the shed she went again.
Now after so much nagging from my brother out she has come, I've started again. He talked me into changing and trying a brushless motor and a smaller esc he had in his tool box from his helicopter he was shelving as its rota head was damaged beyond repair.
I have now fitted them and if they work I will change the esc to a forward/ reverse esc in the future at some point.
Sea trials are still away off more than likely in the spring, because the decking has yet to be painted. That will be the next job.
I think that's all for now, as I have probably bored you all to tears. I hope update as I progress further.
Just to let you know I'm Tom (alias BOATSHED).
I was cruising the blogs, and saw this from 3 years ago, I'm guessing you're retired now%uD83D%uDE06! We're able to finish it? Your perseverance is commendable.
I was cruising the blogs, and saw this from 3 years ago, I'm guessing you're retired now%uD83D%uDE06! We're able to finish it? Your perseverance is commendable.
HI Squirtgun, up to no she still hasn't changed, and is still unfinished.
I did take her out and try her on Clapham Common Long Pond, a bit of a disaster ☺️ , the prop that was on her was a 4 blade 40 mm, was a bit to big and would not steer and tended to react to the torque and pull one way 😭 .
I have since purchased three smaller prop's 20,25 and
30 mm 3 bladed brass props. will have to experiment with these at some point.
Sadly what with work and trying to get some work done on a classic car I have, I haven't had chance to do anymore 😭 .
Haven't retired as yet, that date isn't until August, but as the law has changed, you do not actually retire anymore I'm told from work, you either work on until you decide or you just resign now.
So I will get some more done soon but have just been to busy on the classic car.
Thanks for asking and when done more I will post it.
Kind regards Tom (alias BOATSHED )
HI Squirtgun, up to no she still hasn't changed, and is still unfinished.
I did take her out and try her on Clapham Common Long Pond, a bit of a disaster ☺️ , the prop that was on her was a 4 blade 40 mm, was a bit to big and would not steer and tended to react to the torque and pull one way 😭 .
I have since purchased three smaller prop's 20,25 and
30 mm 3 bladed brass props. will have to experiment with these at some point.
Sadly what with work and trying to get some work done on a classic car I have, I haven't had chance to do anymore 😭 .
Haven't retired as yet, that date isn't until August, but as the law has changed, you do not actually retire anymore I'm told from work, you either work on until you decide or you just resign now.
So I will get some more done soon but have just been to busy on the classic car.
Thanks for asking and when done more I will post it.
Kind regards Tom (alias BOATSHED )
A Few Pics of my 1/16th Fireboat now fitted with working Fire Monitors (superbly and very kindly produced by PeterHS93)
Ready for testing ASAP - Now I need some 1/16th Crew!
Chris
{"text":"A Few Pics of my 1/16th Fireboat now fitted with working Fire Monitors (superbly and very kindly produced by PeterHS93)\nReady for testing ASAP - Now I need some 1/16th Crew!\n\nChris","subject":"34\" Fireboat","media":[{"id":"1298589303","name":"1298589303.jpg","caption":"","url":"https://beta.model-boats.com/media/1298589303/l","thumbUrl":"https://beta.model-boats.com/media/1298589303/s","isImage":true,"ext":"jpg"},{"id":"1298589304","name":"1298589304.jpg","caption":"","url":"https://beta.model-boats.com/media/1298589304/l","thumbUrl":"https://beta.model-boats.com/media/1298589304/s","isImage":true,"ext":"jpg"},{"id":"1298589305","name":"1298589305.jpg","caption":"","url":"https://beta.model-boats.com/media/1298589305/l","thumbUrl":"https://beta.model-boats.com/media/1298589305/s","isImage":true,"ext":"jpg"}],"youtubeUrl":""}
A Few Pics of my 1/16th Fireboat now fitted with working Fire Monitors (superbly and very kindly produced by PeterHS93)
Ready for testing ASAP - Now I need some 1/16th Crew!
HI Colin & Chris,
There is some great work on here. I have just purchased an old mostly built 46'' Tender and want to bring it back to life. I am new to RC stuff but want to do the best scale job I can. Any drawings would be a great help to me as I don't have any and the boat has no fittings on board at all. Where could I get hold of some air cowls at this scale, pumps, pipes lights etc...
Any help would be very greatfully received.
Regards
Dean
HI Colin & Chris,
There is some great work on here. I have just purchased an old mostly built 46'' Tender and want to bring it back to life. I am new to RC stuff but want to do the best scale job I can. Any drawings would be a great help to me as I don't have any and the boat has no fittings on board at all. Where could I get hold of some air cowls at this scale, pumps, pipes lights etc...
Any help would be very greatfully received.
Regards
Dean
HI Stonemonkey. I have a spare set of plans for the 46 inch boat which I can copy and send you. You can also get fittings set for these bigger boats from Lesro models. E mail me on (Email Removed - PM Only) if you want the plans.
HI Stonemonkey. I have a spare set of plans for the 46 inch boat which I can copy and send you. You can also get fittings set for these bigger boats from Lesro models. E mail me on (Email Removed - PM Only) if you want the plans.
Thames fireboat gamma,stationed in london cherry tree dock about WW2 used in blitz raids.
Fibreglass hull,wooden deck,twin 550 motors,single working fire monitor,twin working spot lights,and nav lights.
Was a older display model now fully working but steam generator is a bit temperamental.only used at shows has been at Twyford water works open day recently.
{"text":"Thames fireboat gamma,stationed in london cherry tree dock about WW2 used in blitz raids.\r\nFibreglass hull,wooden deck,twin 550 motors,single working fire monitor,twin working spot lights,and nav lights.\r\nWas a older display model now fully working but steam generator is a bit temperamental.only used at shows has been at Twyford water works open day recently.","subject":"1935 thames fireboat gamma","media":[{"id":"1284656116","name":"1284656116.jpg","caption":"","url":"https://beta.model-boats.com/media/1284656116/l","thumbUrl":"https://beta.model-boats.com/media/1284656116/s","isImage":true,"ext":"jpg"},{"id":"1284656117","name":"1284656117.jpg","caption":"","url":"https://beta.model-boats.com/media/1284656117/l","thumbUrl":"https://beta.model-boats.com/media/1284656117/s","isImage":true,"ext":"jpg"}],"youtubeUrl":""}
Thames fireboat gamma,stationed in london cherry tree dock about WW2 used in blitz raids.
Fibreglass hull,wooden deck,twin 550 motors,single working fire monitor,twin working spot lights,and nav lights.
Was a older display model now fully working but steam generator is a bit temperamental.only used at shows has been at Twyford water works open day recently.
