Dumas kit Carol Moran, renamed Michael for my first grandson.My first build, learning how to make those brass railings each post being soldered following a paper pattern. Some customizing at the request of my grandson with added port holes, and deck features. He helped to paint it.

As requested I have obtained some pics from Brian Clewes's Hovercraft.
The motors are 900 Kv with 80 amp Escs the lift fan is a 7 blade ducted fan, the thrust prop is a 12in x7in cut down to 10in.
Battery is 14.8v 5000Ma.

Just ran across this (compared with most others from the era) incredibly sharp photo, (right click the photo then left click 'Show photo' and then'+' and you'll see what I mean by sharp!!😉) apparently (allegedly?) a
'Vosper 70ft Motor Torpedo Boat V-252 at Greenock in January 1942. in the background is the Flower class Corvette HMCS Trillium(K172)'
(Which makes me wonder if OUR Trillium served on her!?)
+ 2 others! Research continues, I have an interest in both types 😉
Cheers Doug 😎

Trawler enlarged to 1/48 from a free plan called Constant Star in a July 1966 Model boats

385 motor, 35mm 4 bladed brass prop, 6v battery, featuring sound unit and working lights on 3 circuits,

Built from Scrap, about the Same Size as a billings Nordkap, but a lot Cheaper😊

Fantastic. Look at her go

😊

This is Brian Clewes Hovercraft on a frozen Boundary Park Lake in Cheshire UK.
Our resident cob swan and his wife were sat on the ice probably hoping we had brought some feed. They don't bother us and we leave them alone. I should have filmed them taking off later, not an easy task on ice for one of our largest birds.
The hovercraft has two brushless motors and uses a LiPo.

This truly stunning piece was created by Barry Sharman of Southampton international Plastic Modellers’ Society (IPMS UK). A replica of the HMCS Agassiz with a mind boggling level of detail not only on the outside but also on the inside visible through cut out sections of the hull. Barry invited me to see the other side of the model and was amazed to see several crew members restoring that side. Spectacular and no wonder it was protected by a glass case that Barry kindly removed so I could film it without chance of picking up any reflections.

Two models seen at the Plymouth Gin Factory in the Barbican. Whilst there I had to sample the product and chose the Plymouth Navy Gin, which is gunpowder proof at over 57% and like drinking a single malt compared to a blend. Recommended. We were in Plymouth for the IMASS shipwreck conference the next day, which ranged from Byzantine to WW1 Naval shipwrecks, including HMS Hampshire and HMS Vanguard.

Somebody was either disillusioned with model boats or impecunious to the Nth degree because he let me have this BRAND NEW Ripmax Tomkat complete with Motor, ESC, brand new steering servo,action man driver,decals and instructions for a brownie with a bluey postage.
Not my usual type of model but will make a fun change down at our 'postage stamp' lake (?)

SPECIFICATION:RG65
Total lenght:650mm
Beam:150mm
Mast height :915mm
Overal height: 1338mm
RTR total weigh:1290g (without 4pcs AA batteries)
Hull material Plastic
Sail material : Mylar

INCLUDED:
*Completed hull with pre applied graphics.
*Two milar film sail sets
*Carbon fiber masts and booms ]2Rigs]
*Zinc alloy ballast and aluminium alloy fin
*Powerful sail winch
*Metal gear rudder servo
*Battery box an On/Off switch for receiver
*AA Nimh batteries 2200mAh for transmitter and
*rc/radio FrskyTaranis 2.4Ghz

A tour around the many club stands at the international Model Boat Show. Full playlist of videos from the event here,
https://www.youtube.com/playlist?list=PL8iHs7pgHqAYXFGEi8-KfQXZOpYa4esno

My latest project, P&O Ferry "Pride Of Hythe" Built from a Linkspan Model kit.
Nearly finished and awaiting sea trials down our club waters.