Running on Twin Brushless Motors. At Cold Knap Lake Barry, Vale Of Glamorgan.
www.vgmbc.org

Motors Are E-Max GT2820/07

Its maiden voyage took place at the Knap at Barry South Glamorgan. with the VGMBC.
It's a Robbe kit "San Diego" built by a chap on this website "sharpy1071"
Leopard 4074-1400Kv water-cooled motors 100A Mystery ESC's.

After a few teething problems with transmitter setup, everything went fine.

My 1st excursion into model boat building about a year ago....steep learning curve!!!

Currently powered by 2 x 480 brushed on 11.1v, both motors independently controlled by 2 ESC but soon to be refitted with 2x 1000KV brushless.

Planes beautifully and with twin rudders turns on a sixpence!

Wahine was a car passenger ferry of the Union Steamship Co. of New Zealand, and completed by Fairfields in 1966. She was lost in a major storm in the Cook Strait in 1968 with the death of 53 people. The model is substantially scratch-built with some fittings purchased. it is driven by two Graupner Speed 500 motors powered from two 6.6V 3200mAh LiFe batteries. it is fitted with twin stern and a single bow rudders, and bow and stern thrusters as on the original. The smoke effect is provided by a Steam Master Unit.

Stirling was one of the last generation of Rescue & Target Towing Launches built for the RAF and were designated Mk 3 RTTL and were delivered in the mid 1970's. The model is 1/24 scale and is 39inches L.o.a completed November 2015 from donated hull, all else is scratch built. twin 555 motors running at 12v with 2 x 6v 4a sla batteries in parallel, gives a good scale speed, and has about 45min endurance..

Another winter project for myself this time. Twin brushless motors/ESC's all water cooled. interior and deck lights got some figures for deck then onto the lake when the weather breaks.

A winter project for a friend who hasn't the resources to build, so I helped him out. nearly ready for the lake. Twin brushless motors/ESC's all water cooled and a few interior exterior lights.

HMS Nelson, scratchbuilt to 1/8" scale. Powered by two motors driving twin contrarotating shafts with three blade props. She sails on Lake Lisgar, Tillsonburg, Ontario.
I decided on Nelson as she took part in Operation Pedestal, from which I made a 1/216" waterline model of SS Ohio, the ship that saved Malta.
She took a little over 600 hours from solid chunk of basswood to launch. Probably info collection took as long!

Nice little PT Boat I bought off Gordon @ our Club it runs on a 7.2 battery with a Electronize FR30 Speed Controller with BECs twin 540 Motors with
plenty of detail on it

build from a president kit with battlecraft armouments twin 1400kv motors & 90amp watercooled esc 11.1 5000mah lipos

This is my newest project an Ebay buy of a delapidated HSL possibly used to advertise Model boat insurance at some time maybe 50 years old !. I have removed all broken, out of scale and incorrect items, removed old repairs and internal engine mounts. Superstructure is not too accurate but good enough to keep. I have noticed the keel is slightly twisted so will have to try and rectify that and the rear deck is going to be removed also as the adhesive is soft and pliable and there is no rigidity in the build aft of the superstructure. I intend fitting 2 x 12v johnson 600 type brushed motors as the original had 2 props. I have plenty of photos of the external layout but lack any detail of the open bridge 😟 . I think this will be a difficult project to complete hope I do it justice

Another Mersey ferry and another Royal Iris. This is 1:64 scale (3/16":ft), measures 29" long and weighs 11lbs. Powered by NiMH 6V batteries and Electronize 365-14 motors. it is fitted with either a self-contained sound system playing the 60's "Liverpool sound " music, or fitted with 12V NiMH batteries to illuminate the lights.