This is a restoration of a launch I was given that was found in a rubbish bin on a farm here in Auckland it is an old RCM ? plan built 'Fairacre' and was pretty rotten when I received it as it is made in balsa and had been wet for quite a while. I stripped it down, re 'planked' large portions of the hull and fiber glassed it, re- built the cabin, re- marked the deck planks, fitted lights, curtains (ex Graupner Commodore bits from the 70s I had kept), stern ladder, cleats etc. it is fitted with a 540 brushed motor (originally had an old Graupner monoperm) and 70s Graupner ESC and Using 2.4 Radio gear. I still have a few things I'd like to do such as a re-wire, fitting chine spray rails, better motor and maybe some safety rails, but for now it does the job.

My dad built this over a long period of time, starting in the '80s. The hull is fibreglass and the rest is scratch built from plastic card, balsa, ply, wire and anything else he could adapt.
Although he installed the motors, props and rudders he never completed the RC installation or tested it. I inherited his boat models a few years ago and wanted to "finish the job", getting the model on the water. After installing the RC gear and batteries over the last few months, this weekend was the first sailing outside the bath at the Valley Gardens boating lake.
Happy to report that it sailed really nicely, seems to be reasonably stable although I did restrict it to calmer times when the MTBs and faster boats weren't running !
HMS Cadiz was a battle class destroyer, laid down and launched during WW2 although she didn't receive her commission until 1946 so didn't see combat with the Royal Navy, serving with the home fleet. Due to the changeover in pennant numbering she was originally allocated R09 and later, when the admiralty decided to revert to the D for Destroyer pennant numbering she was assigned D79. To reflect this my model has D79 on the starboard side and R09 on the port side.
She was sold to Pakistan in the late '50s, and renamed PNS Khaibar. She was sunk with the loss of nearly all hands in 1971 in the indo-Pakistan war.

I thought as the lake is still full of weed this would keep me sailing built from light ply fibre glassed inside & out then painted length 33" width 12"height 16" to top of the prop
70 amp esc aircraft brushless motor 11" prop

I am busy with a landing craft i thought this would be another one to beat the dreaded weed 😱

Scratched built on a fibre glass hull, home made sails with a modified star wars figure
Bought from a member of our Kingswinford Model Boat Club, Peter Ellis, who sadly passed away

Asheville Class gun boat model is 51” long weighs 22 lbs. hull covered with 2 layers of 2 oz. fiberglass cloth and resin. All plywood and balsa construction finished with fiberglass resin and Model Master paints. Working radar mast, turrets, desiel sound, whopper sound, general quarters sound, sierene. Power is MACK
Drives 12 volt system 2 x 2 6volt 3000 nimh each drive. Very fast in the water.

Model is 49” long and with ballast keel added weighs 17 lbs. hull is covered with 2 layers of 2 oz. cloth fiberglass cloth and painted with Krylon spray can paint. Hitec sail winch servo for main sail and standard servo for jib. Model has auxiliary 6 volt electric power to compincate for my sailing ability’s and wind conditions.
Sails are Mylar.

Model is 28” long weighs 7lbs. Hull covered with 2 oz. fiberglass cloth deck covered with 3/4 oz. fiberglass cloth and resin finished with spar varnish. Power is MACK 5045 motor and 2 6 volt x 3000 nimh packs.

Dunmas kit MACk 5045 motors and hardware. Two layers of 2 oz. Fiberglass cloth on hull 3/4 oz cloth on deck Klass Coat epoxy paint . Model has cabin lights and running lights. Power 2 x 7.2 packs.

Scratch built from a 1975 free plan, hull is balsa frames sheeted with basswood and covered with 3/4 oz fibreglass cloth, superstructure is styrene sheet, missile launcher from balsa block, forward bofors torpedo launcher from styrene sheet and wood dowl, photo etch ladders, white metal handrail stanchions, other fittings are brass and resin, lw-02 radar and directors are from shape ways rudders and stabilizers are balsa block, you get the idea.

I built this 1/125th scale Amati kit of the Titanic over two years from 2016. it has enhanced etched brass details from Minibrass. Conversion for radio control involved making the hull waterproof with multiple layers of fibreglass cloth bonded with epoxy resin as well as the installation of a drive train and RC gear. With only a tiny rudder, steering is dependent on a mixer unit controlling the differential speed of the propellors.

Billing boats, which took me 3 years to build.Hull was planked and theh fibre glass. Boat has full functional remote with seperate port starboard control,rudder and bow thruster. full inside and mast lighting.

Zoom 1 (Interceptor) Mono boat.
Built from a Glassfibre hull, brought on Ebay for £35 the hull is a slim mono racing type with a self-righting side cabin it runs a 1400W 14V 2958 4200KV Brushless Motor and 29-S Water Cooling Jacket with additional air cooling fan.
I did not want to use a flexi drive as high maintenance and prone to failure so the shaft runs via two universal joint one at each end. the propeller is a 38mm copper alloy
The ESC is a 200W and water cooled the twin rudders supply separate water one for the motor and one for the ESC.
The rudder are positioned to reduce prop-walk and are hinged to prevent damage if you hit a object in the water and also for ride adjustment.

Turn fins and trim tabs for ride adjustment were provided by a spares kit for another boat. also foamed and added an inner sealed hatch, a rubber bump strip and safety loop.