sunday sailing on Cwmbran Model Society water

More pictures from the open day
A scratch built Vanquisher
A model from one of the visiting clubs
Dhulia and A Sun XXII
And a modified Par at Kit

More pictures from the open day
A scratch built Vanquisher
A model from one of the visiting clubs
Dhulia and A Sun XXII
And a modified Par at Kit

More pictures from the open day last year.
3 scratch built JP Knight tugs and a very much modified Avenger kit

Some more pictures from our last open day we had various clubs visit us and lots of tugs.

I thought I would post some pictures. from our club open day last year

HI This is a Celia, I think, it was a caldercraft kit but am not sure. it is running on a 545 motor at either 6volt or 7.2volt with a 35mm 3blade brass prop. its performance is about right for the scale and type of boat. it sails at the Lake used by the Cwmbran Club. I bought it last year at the Shepton Mallet Show.

The way that I do my hull plating is......to use printer paper about 90gsm, and divide the hull up into approriate lines horizontal and vertical to represent the plating once the hull is sanded and smooth of course.
then cut the paper into the sizes that you need to represent the hull plating.
then thin down waterproof PVA glue so that is like double cream and then to represent the plate joggling lay each piece onto the edge of a steel rule so thar about 1/8th is overlapping and then run your thumb nail along the edge of the rule this will give you a joggled edge, repeat if you need more than one joggle per plate, have a practice first and see how easy it is.
then just stick tmen onto the hull using the PVA glue remembering to overlap the joggles ( I like that word). Easy peasy.
once every thing is really hard and dry ,give the paper two or three coats of the PVA all over and it dries like glass.

These pictures are of three of the NEWCASTLE rtr tugs that we have in our club, they have all had minor modifications and a re paint but all have the original motors but run on 12 volts.

This little tug is a NEWCASTLE ready to run model that has been modified and repainted and is running on 12volts, if anybody has one they are a remarkable thing,almost unsinkable,in the pictures I was doing my best to see how stable she is, as you can see. The answer is very.

this is the Vanquisher, she was the first Diesel powered ship towing tug built for the thames in 1955.
the model is scratch built plank on frame, with 12volt motor, lights,and revolving radar.

I built this one about 3 years ago she is built at 1/24th scale 50"long and is a plank on frame hull , scratch built using lime wood planking and 9mm ply for the frames and keel, the rest is birch ply of various thicknesses.
she has a 12volt cooling fan motor driving a 4" prop,and has a 12volt 48amp hour battery ,plus some lead for ballast,with working lights and revolving radar scanner