This is based on a Fairey Swordsman and is another of my own designs but made in Vac Formed Styrene for which the vac former was home-made as well. The model is designed specifically for youngsters and club members who want to race together. The boat only has 5 parts!! Top, bottom, rudder and servo cast assembly ( Polyester resin) and motor, prop shaft assembly also Polyester resin. A wooden frame that forms the seal and holds hull in shape. The whole top comes off. its scarey fast and very tough (2mm styrene) and was made for under £25. Hoping build article will also go into MB magazine sometime. (Motor: 2820 x 1100kv) (ESC: Turnigy w/p. 30 amp) (10/10)