I can only dream of a setup like this for my wattle its beyond me
I did make a boiler which would have been a big saving.
Unfortunately it went missing during our big move so its dream a lot its beautiful a work of art thanks for posting
Shadowing of U-181 from the subcam on HMS Triumph at the Naracoorte swimming lake. There are other videos and detail photos of these submarines previously posted on this site.
This Swede Johnson and his yawl and its captain, Popeye. Swede pasted away several years back, I wanted to post this in his memory. He scratch built all of his boats over the years and was well know for his leading edge designs like the US1 Meters and Marbleheads. He taught me to scratch build boats and sails. Yes, Popeye's arm moves with the acting tiller.
"Searcher" was a Graham Goodchild design offered as a free plan in "Model Boats" in December 1981. Here is my version , many years in the building and finally nearing completion. Access to the hull on the original design was via a hatch above the cockpit - I had no faith in my ability to make it water tight so went for removable grp. hatches. The model is activated by a reed switch just in front of the rear hatch, which saves me the hassle of doing/undoing all the nuts (this had not been fitted when I took the first picture). The rear hatch gives me easier access to the drive coupling. The name "Nimbus2" is in honour of one of Dan Dare's spaceships in the Eagle comic. The third picture shows the ship in its final state with added 'enhancements' and working lights.
Checking for size comparison and scale! The barge is 50 inches long by 12 inches beam, will draw 2 inches light and 6 inches loaded. I plan on making it an oil tank barge with a swiveling boom and two deck houses aft for the pump engine and housing for crew.
Scratch building a barge for my tugboat Miss Doris to push. May deck it over to become a tank barge I used to push on the Delaware River. if
i do deck it over, I'll hinge the deck to make use of the space for my RC gear.
Thanks for posting the photo of the barge build, gives me some ideas.... I have some tugs in progress, but no barges. I like the way you framed the hull. Joe
This boat developed a very noisy stuffing box even though it had marine grease. After a more careful inspection I discovered the gentleman who built it 25 years ago, had mounted the motor in a way that was not inline with the shaft. After running the boat for awhile the inner noise became more like annoying. The older universal used a flexible spring between the couplers. See photo.
I cut a nylon dog bone which was then inserted into a brass tube. Glued with super glue to make an extended universal. Next will be aligning the motor with the shaft and creating a new motor mount.
This ship was a lightship tender named "Coeur de Lion" that was armed and drafted into the Union during the civil war to counter blockade runners. This model is scratch built and is inspired by a paper model designed by Magnus Mörck. A sidewheel steamer equipped with the typical walking beam machinery, it was rebuilt to carry three guns. A line of iron plates along the gun wales added a measure of armoured protection. After the war it was returned to lightship service. On my model the paddles are independently driven, mainly because I have a Robbe Navy F14 transmitter with twin sticks. The walking beam is operated by a servo modified for continuous rotation. The original ship towed a barge that flew an observation balloon and could be described as the first 'aircraft carrier' the fifth picture shows the barge I have made - I hope one day to emulate the real thing by raising and lowering a suitable balloon. I have included some pictures of the rest of my paddle fleet.The 'Rachel Erin' is a freelance sternwheeler 'quarter wheeler' tug that uses a worm drive to the paddles. She does not steer well. The last ship is an enlarged version of Graham Goodchild's Santa Anna.
This is one of the limited edition Sirmar kits that was produce in the early 1990’s.this model was made by a friend of mine who’s a dockyard fitter and turner it was made about twenty eight years ago. Based on a tug that I worked on in and around Portsmouth harbour. This model has a working voith unit opening engine room skylights. Working lights, removable deck hatch to get at the unit like the real boat, the superstructure and gun whales are made from plasticard. The fender was made by a friend to the same type as used on the tug. The wheelhouse is copied like for like. The towing hook is copied from photos and slips like the real one. in all my years I haven’t seen another one like this . Sirmar made twenty numbered hulls as kits .
