At last I have a Fairey Huntsman (34 inch) that appears to work, The photos are of it last Sunday at Cwmbran it needs a little extra ballast at the rear but once added it should be OK. it's running a Johnson 600 through a Graupner 3:1 gearbox at 9.6V with a 50mm brass prop, I may also try dropping the prop to 40 or 45 on the next trials.

This model was originally scratch built in 1964 by my Dad as a 15th birthday present for me,the length over all is 60.5" with a beam of 17.5" and a theoretical draught of 3.5",not sure as to the actual design but it is meant to be 1/12th scale, it was originally powered by a 12 Volt windscreen wiper motor out of an old Mercedes car, and the radio gear was a home made system as well, but both are now well beyond repair and I am fitting an MFA 800 Motor with a Fusion Aquapower ESC rated at 125amp. run by a new 2.4 Ghz radio system.
When I get to sea trials stage I will send Update and possible video footage.This boat along with the rest of my harbour, will be on view at the Abbergavenny Steam Rally this weekend June 3rd and 4th(Sunday Monday) in the model section marquee.

Here are a few pics of my Scout which wwas originally built in 1958, but left in my parents loft when I left home in 1966, but thankfully still there when my Mum asked me to clear the attic for insulation installers last year.
So far have cleaned it and fitted a MabuchI Brushed motor of unknown power, but appears to work well at 6Volts running a 2 blade plastic prop 30mm 'S' type.
Havent got round to fitting radio gear yet, so have done tests as a free sailer, setting rudder on a slow arc and watching as I walk round pond.Will update as soon as next stage is complete.

Model Slipways 1/32 scale harbour tug kit built late summer/autumn 2011. Powered by MFA 2.5:1 geared motors running on 6 volts and powered through an Action P94 Mixer/speed controller to provide great steering performance -- easily turns on it own axis. Sails mostly at Knightcote Model Boat club

based on a Lesro kit of the MK21 Sun tug. This slightly later version was fitted with fire monitors for handling tankers in the thames esturary as well as normal docking duites of liners and freighters.
Fitted with a decaperm 3:2 geared motor and twin 12v 7amphr batteries, it can run for several hours, even when towing other boats around the pool.. Fog horn installed, lighting system, working decca radar, Illuminated map desk and decca unit on the bridge.

HI fellow modellers, Another model from the RADMC fleet at the fleetshaven workshop and boat yard in Ponthir.This model was scratch built using a fibre glass hull and plan obtained from a fellow modeller at the Bridgend Show in 2007. The front door and some fittings are made from plastic card and tube, decks are from ply and timber. On board figures are from the pound shop and car boot sales, modified by myself. The on board tank and half truck are RTR models that I have modified their looks to fit into a WWII theme for the craft. This craft has twin drive, 400 motors via 2.5/1 gearboxes. I tend to use both sticks on the TX for drive as this allows me to turn the model on a six pence.The dispatch door works from a rotary pot on the TX and via a rotary sail winch servo in the hull. I have just modified my Planet 5 TX to allow me to change my radio gear in this craft. This model has had meny trips on Cwmbran Boating Lake and at shows the society attend during the year. Still haven't allowed the tank or half track to run off the landing craft up the lake side slipway. one day I might get it on video. Hope you enjoyed the photo's. Regards GreyWolf

HI Fellow Modellers,
Another model from the RADMC fleet at the fleetshaven workshop and boat yard in Ponthir.This model was built from a Caldercraft Kit, This model came into my possession for the price of 20p, a raffle prize at Bryn Bach Model Clubs OPen Day 2010, when it was built is unknown. The item being made for display use and not finished off, no internal electronic fixtures. Did have a prop shaft and prop that had not been fitted correctly. 50% of all the fixtures had to be removed and refitted before they fell off, some didn't stay in place from the show back home. The model was finised off using a photo of the Milford star on the internet. The fish boxes and figures being obtained off DON one of the Society members who had a mould to make them in white metal, only required cleaning up and finishing off. A graupner 6 volt steam unit is fitted in the funnel and to make the boat a little more realistic on the water,a maplin steam sound system has been used to generate the sound of the engine. A simple mod allows the revs to be linked to the engine voltage. The drive motor is a 550 with the lowest revs I had in MJB's this was married up to a 2.5/1 gearbox I also had in stock. The main motor and steam unit are supplied from a 7.2 volt nicad racing pack. This model has had meny fishing trips on Cwmbran Boating Lake and at shows the Society visit. Hope you enjoy the pictures, Regards GreyWolf.

HI fellow Modellers,
Another model from the RADMC fleet at the fleetshaven workshop and boat yard in Ponthir.This model was built using a Billings Kit, bought for me as a Christmas pressent in 2009. A graupner 6 volt steam unit is fitted in the funnel and to make the boat a little more realistic a maplin steam sound system has been used to generate the sound of the engine. A simple mod allows the revs to be linked to the engine voltage. The steam engine rotates using a stripped down minI servo, fitted under the motor housing on the deck, again linked to the main motor voltage. The two 9.6 volt AA batteries and control gear are mounted under the boats floor, forward locker, a minI servo for steerage is fitted under the rear seat and the receiver is located under the wood pile. Figures are self made from items obtained from the local pound shop. The modal can be seen sailing at Cwmbran Boating Lake or at shows the society visit. Hope you enjoy the pictures, Regards GreyWolf.

Scratch build of Dave Metcalf Lulonga river boat ,
ready for running gear and paddles but the cost for those is ?200 not cheap .
Will now go on the back burner till I saved up a bit ......LARRY...

Have had this boat 30 years .Started it for my eldest son but never finished. But now with two boys of his own I am determined to give it my best shot.
Completly stripped it, repaired delaminated sections,took out all the gear (motor,radio,servos) and started again.
I will update progress as time goes on but I am determined this will be on the water this year.

In the process of converting a revell 1/400 version of the Queen Mary2 into a working r/c model using pager motors in the pods instead of using propshafts to keep it as authentic as possible. Have put gearing in to turn pods so dont have to have a rudder. So far all tests have been successful and will shortly have all detailing done and have ballast sorted ready for test runs.

Built from Aerokits kit originally but rebuilt/modified many times since then!
Twin 540's (geared) 6V Pb Gel battery for drive. 3 Blade 50mm props (contra rotating) lights (cabin, running Ights and searchlight) on 4.5V Deacs. radar scanner and winch on same supply, radar display screen on a single AA 1.5V.

Fleet Systems radio and speed controllers, Futaba rudders servo, RCME servo driving cam/micro switch unit for lights etc.