all ready to go new paint & varnished added new leather seating windscreen made from a plastic salad bowl 45mm 3 bladed brass prop 850 brushed motor powered by a 11.1 5000 mah lipo
O and new cowls from the model shop 👍
Recently built from an Aeronaut kit, this is a 1/24th scale Pilot Boat based on a German design. Powered by two 540 brushed motors with 3 bladed brass props it attains something like scale speed. The colour is Volkswagen Bright Orange, courtesy of Halfords and the non-slip deck is acrylic green mixed with silver sand then covered with a silk finish varnish.
The boat was filmed at an illuminated regatta staged by Bournville Model Yacht and Power Boat Club on their lake in Bournville, Birmingham
%u2003
Hi Colin
Yes, I did brush paint the deck with an inexpensive acrylic.
The sand mix was trial and error. I started off with a thin mix and gradually added more sand, testing it on scraps of plastic, until I was happy.
A brushed coat of satin varnish waterproofed and added to the realism.
Best of luck.
Steve
Hi i acquire this Admiral Barge some time be for the summer it needed a lot of work to be done I believe the model was built in 1950s .In pic 1 that's the condition she was in when i got her .The hull was in perfect condition under the paint work I replace the back deck and the deck in the middle where 2.5cc diesel engine goes in and now its all electric .in pic 2 is the finished project in perfect working condition .
When in Australia I was taken by the history of HMVS Cerberus, whose hull is now a breakwater in Port Philip Bay. After a lot of research on the internet I decided to build a model of it. it is not totally accurate as I could find no definitive plans. Therefore most measurements were made from photographs and guesstimates of scale from sailors in pics. it is radio control but not, as yet, tried out; still one or two items to be completed: eg mast & anchors. Update all but finished anchors and various
bits and pieces of deck fittings to be placed. New phot shows where we are. The partial print showing below is a painting of HMS Caroline in dry dock. Spent fives years in the RNR here in Belfast on board her.
Hi I live in the Melbourne area and have sailed in Port Philip many times, have seen the hull of HMVS Cerberus, it really is a sorry sight. Your model is fantastic, I thank you for giving me some idea of how she looked in her Hayday. 😊
So, the crane story. Here are pics of the crane in it's original guise - essentially the jib raised and lowered and the turret rotated. I decided to add extensions to the jib internally, and then use servo arms to send them through the deck (inside the turret) such that a servo could raise and lower them from below deck. The issue was trying to get a mechanism that would allow the arm to raise/lower, whilst being able to rotate from inboard to outboard! Solution - a helicopter swash plate from a crashed Blade! The connection joints had to be moved around the swash plate (refixed with superglue) to make it symetrical. More photos to follow..
Sorry, didn't realise I hadn't answered this question! I used a sail winch mounted under the deck, with the line going through the central tube that the crane is mounted on. I had to add a piece of curved plastic to allow it to go round 90 degrees (half a piece of the inside of a ball point pen!) but it works well.
HERE I HAVE RAU XI WHALING BOAT NOT A LOT OF PEOPLE APPROVE OF IT CANT SEE WHY ITS A MODEL.
I GOT IT OFF A FRIEND FOR A GOOD PRICE. ITS RUNS ON A DECKEPERM MOTOR AND 6V LED ACID.
IT HAD BEEN STUCK IN A WINDOW FOR YEARS AND NEVER TESTED IN WATER HE HAD PUT EVERYTHING IN EVEN THE TRANSMITTER. WHEN MY MATE SPOTS IT ON EBAY WHIT EVERY INTENTION OF REDOING IT.
YES AND IT SITS IN HiS ROOM FOR ABOUT 2 YEAR TILL THE INTEREST HAS WORN OFF ABOUT DOING THE MODEL.TILL HE OFFERS ME IT FOR A GOOD PRICE WELL CHRISTMAS WAS COMING HAVE TO BE NICE TO WIFE ???? KNOW WHAT I MEAN YES AND NOW ITS MINE FULLY RESTORED AND LOOKING SMART.
Scale models are the only way to see in 3 dimensions how long-gone vessels looked, so it's great to see a unique model that represents this class of vessels.
Another winter project for myself this time. Twin brushless motors/ESC's all water cooled. interior and deck lights got some figures for deck then onto the lake when the weather breaks.
Thank you figtree7nights, up for sale now!! it's stupid on 4 cells, mad on three but behaves very well on two. I sail it mainly on three cells as I have more 3 than anything else.
I decided to build from scratch HMS Blake, I used the Jecobin Plan for HMS Tiger 1/96 scale. This was the first ship I served on in the Royal Navy 1976 to 1979. The hull is supplied by Scalewarships.com, the fittings, Scalewarships.com, John Haynes Fittings and SIMAR; the running gear from GT Sitek.
The build is nearing completion and now requires the guardrails and the decks fixing in place.
HI Martin. I would love to see that as I'm finishing a 1/72 scale one. I brought a 70% built Hms Marlborough but converting to an RN one,thinking either Kent,Lancaster or Somerset. I've had to do a couple of mods like changing the Vickers to a kryton version etc. it was mostly tugs n trawlers when I joined but there's more grey funnel stuff now and a few subs as well including my Trafalgar class so it's worth coming down.
Regards,Glenn.
this is a Peter Wiles Composite Marblehead moulded in glass/ carbon fibre cloth it has a beam of 193mm with a moulded deck & raised foredeck it can take a swing or shroudless rig this one is on a swing rig 3.4kg ballast draught 620mm
This is my newest project an Ebay buy of a delapidated HSL possibly used to advertise Model boat insurance at some time maybe 50 years old !. I have removed all broken, out of scale and incorrect items, removed old repairs and internal engine mounts. Superstructure is not too accurate but good enough to keep. I have noticed the keel is slightly twisted so will have to try and rectify that and the rear deck is going to be removed also as the adhesive is soft and pliable and there is no rigidity in the build aft of the superstructure. I intend fitting 2 x 12v johnson 600 type brushed motors as the original had 2 props. I have plenty of photos of the external layout but lack any detail of the open bridge 😟 . I think this will be a difficult project to complete hope I do it justice
This is a 30-inch static model of the trawler that had suffered damage and had most of the deck fittings missing when I got a hold of it.
It was 'de-constructed' by Victor Marcham of the Mablethorpe Model RC Boat Group. Being a static model, it had to be bored through to fit a propshaft, a motor and rudder, and had new decking, mast and working LED lights.
It has yet to be weighted so pond trials can begin.
Thanks Peter ! I think it makes a build far more interesting when you know that it is a replica of an actual vessel and to know her history. Enjoy her.
You are right - it does make it more interesting... despite there being precious few pictures of her around! I'm as pleased as punch with the way she looks now.
O and new cowls from the model shop 👍