This is Maxine, a 1960' aerokit Sea Queen 😊 She has been stripped down, hull repaired along with top sides. New brushless motor/lipos etc. Goes quite well and pretty stable as you can see.She is sailed on Wibsey Park lake in Sunny Bradford.

Bought as a wreck off ebay . stripped down,repaired hull and top sides. re positioned the propshaft. Re painted. New Brushless motor/ Lipos etc. Goes quite well for an old girl, Believed originally built in the 60's. Ill try to upload a video of her strutting her stuff on Wibsey Park lake in Bradford.
Edit: I've managed to upload a video of her in action on u tube ,see link below

My 1st excursion into model boat building about a year ago....steep learning curve!!!

Currently powered by 2 x 480 brushed on 11.1v, both motors independently controlled by 2 ESC but soon to be refitted with 2x 1000KV brushless.

Planes beautifully and with twin rudders turns on a sixpence!

Kit built but I scrapped the plywood for mahogany as I wanted something in the "Riva" Style.
Powered by a 1000kv brushless on 11.1v, its quick across the water and very stable.

I sail with the Potteries MBC in Stoke.

This film was taken on our home lake at Needham Market . Originally an I.C powered boat I have converted to single brushless motor on a direct drive 48mm prop , single rudder . Powered by 2*5000mah 4 cell lipos . As you can see I am very pleased with its performance . 😎

I built this sea Queen ,aka Blue Streak, from a Jotika kit. But found the motor did not give the performance I expected. So the motor was replaced with an Overland T4250 Brushless motor with Fusion Hawk 60amp ESC fed by an Overland 14.8 4s 4000Ma Lipo battery. The performance is greatly enhanced, Boat is finished in white with blue cabin tops and a large blue streak down each side. And shows the Australian flag.

Another winter project for myself this time. Twin brushless motors/ESC's all water cooled. interior and deck lights got some figures for deck then onto the lake when the weather breaks.

A winter project for a friend who hasn't the resources to build, so I helped him out. nearly ready for the lake. Twin brushless motors/ESC's all water cooled and a few interior exterior lights.

HI I done a lot of work on this fire boat with the paintwork it still need a lot of work to be to her she is 46" long .
I put in a new brushless motor and speed controller runs on 7.2 v batteries

This is my newest project an Ebay buy of a delapidated HSL possibly used to advertise Model boat insurance at some time maybe 50 years old !. I have removed all broken, out of scale and incorrect items, removed old repairs and internal engine mounts. Superstructure is not too accurate but good enough to keep. I have noticed the keel is slightly twisted so will have to try and rectify that and the rear deck is going to be removed also as the adhesive is soft and pliable and there is no rigidity in the build aft of the superstructure. I intend fitting 2 x 12v johnson 600 type brushed motors as the original had 2 props. I have plenty of photos of the external layout but lack any detail of the open bridge 😟 . I think this will be a difficult project to complete hope I do it justice

Police (Scotland) 1.12 scale. made from a Semi-Kit by Models by Design, built 2014.
This is modelled from the interceptor42 range by Safehaven Marine. This is my first full build of a model, having only done restorations previously.
Model length is some 42 inch, beam of 12 inch. (106cm x 31cm)
Power is by twin E-Max BL2826 Brushless motors and 1, 80amp speed controller running on 2 NiMH 7.2 volts.
Fitted with Action electronics Police siren, and with detailed rotating blue lights and searchlights.
I sail this at Cold Knap Lake Barry Vale of Glamorgan, and I am the Founding member of the Vale Of Glamorgan Model Boat Club.
Also included is my Portland Pilot interceptor 42 which was the original prototype from Models by Design which I purchased and added lighting etc, this runs on Brushless motor running on 12Volt lead acid.
Visit our website at http://vgmbc.org/

This is my M.F.A Tracker . When originally purchased it had the large and heavy 850 motors in it and old electronics , after a close call with a fire on board I decided to refit her out with modern Brushless motors and over rated Escs powered by Lipo's . Works out a 1/3 rd the weight 3 times the speed and run time over an hour . So a great result

Oh yes , sound effects donated by nearby Tug 😊