This is Creepy,a springer tug that is 5 yrs old now.He pushes #1200lb pumpkins for the pumpkin regatta along with saving many of the PMPBA club members boats from certain sinking or floating away.I never go to any of the club floats without him.He runs a Harbor freight 550 motor running a Target Hobby 320amp ESC,on a 5000mah 2s lipo battery.The plans can be downloaded free off the internet and takes about a week to build for the experienced builder,Great for the new boat builders to do because its an easy build tug.Simple door skins,some balsa,1/2a running gear from Dumas,1.5 brass prop,2x2 rudder from aluminum,cheap 2channel radio,ESC from Target Hobby.

Please note that this kit includes Motors and couplings from Deans. All you need are the servos, speed controller and radio to complete this kit.

When in Australia I was taken by the history of HMVS Cerberus, whose hull is now a breakwater in Port Philip Bay. After a lot of research on the internet I decided to build a model of it. it is not totally accurate as I could find no definitive plans. Therefore most measurements were made from photographs and guesstimates of scale from sailors in pics. it is radio control but not, as yet, tried out; still one or two items to be completed: eg mast & anchors. Update all but finished anchors and various
bits and pieces of deck fittings to be placed. New phot shows where we are. The partial print showing below is a painting of HMS Caroline in dry dock. Spent fives years in the RNR here in Belfast on board her.

This was a static model, that the gentleman I got it off had it for two years and when I asked why don't you put it in a box his reply was the box would be to high at 36" so I said to him is it radio control,NO static model only but can be converted,so I brought it and also showed him that if you move the tube slider on the mast it folds(one unhappy chappy),so I set about radio controlling it with a smoke unit(water) and it gets quite a bit of attention at shows because it's different,the model is based on the Queen from new Brighton 1897-1923

HMT Confident built by my late father, Scratch built over two and half years. Twin 65mm props driven via a scratch built gearbox by one 800 size motor. Original 2 channel Sanwa radio fitted and working fine. Lights, working radar, water canon, winch, horn and bow thruster all of the 2 channel by using the trims and micro switches.

This video shows four New Zealand frigate models, at 1/48 scale, radio-controlled, HMNZS Canterbury leads, then Waikato, Otago and Taranaki. All models built from scratch, from Navy plans.
Build time about 6 months each. 1970's era idea based on a photo of these ships taken sailing in Wellington Harbour.

Guess most of you have heard of the Khetanna, Jabba The Hut's sail barge from Star Wars. I looked around on the net and to my big surprise, the search engines did not spit out radio controlled versions of this model. Which made me think, and then decide to built my own.
It is scratch build, based on a "scudder" hull, a design by Glenn G. I printed a few pictures of Khetanna from the net and used those for guidance in the process.
The superstructure is a combination of balsa and ply wood. in the Star Wars tradition, the boat is propelled by a jet propelled engine. To finish it off, a Lego version of Jabba was added for extra detail.
It was a fun and fast project to built, maybe a dozen or so evenings.
(scratch) building is my passion and only sail the boats with my son about once a month. We've got a pond near Newcastle (AUS) harbour which is pretty good (providing there's no weed in it) but the disadvantage of this pond is salt water, meaning a proper rinse of the models is needed after each sailing session. Recently we have moved our sailing sessions as well to the liberty pond in town. The model captures the audience, the vast majority recognize the Khetanna immediately.
Happy sailing.

Jeroen

37" tug, near completion, Futaba radio, single screw, fire monitor, bilge pump, deisel sound, for nephew.

Built from a plan in 'Model Boats' in the 80's with a balsa hull and ply decking. Powered by a single cylinder 'Unit Steam Engine' from the same era, and a meths fired boiler. Only recently has radio control been added.

Nautix 1/32 North Sea Fishing Trawler Our Lass II Whitby RTR Boat

A nicely detailed radio controlled 1/32nd scale model of the Whitby based 21.5 metre North Sea trawler Our Lass II. This vessel is typical of a number of modern, well equiped trawlers built in recent years. now sold my boat

Aquired as response to grandsons'Can't we have one like that' request on seeing other club members ' Hooligan boat'.
Cheap second hand commercial speed boat steered by shutting down port or starboard motors and only on/off on pretend transmitter.
Now modified with proper ESC, 2.4 radio with servo operated rudder and upgraded to take 8.4v NiCad.
Length: 30 inches_ Not yet sailed in modified form !

This model of a German North Sea FishingTrawler was built from a Graupner kit in January 1974. The crew are South American, the dog Welsh the owner English and her home port is Maldon. She is powered by a 6volt 400 motor coupled with a Viper 15amp controller and my Spectrum radio outfit. The 6volt 10 amp gel cell also acts as ballast.