My newest build , Billing Boats Fairmount Alpine
i start building for one years ago , i have mount bowtruster
and start with all lamps and things , i going to mount an radiocontrolled winch on deck and radiocontrolled cranes
more pictures is comming
Welcome aboard jugge, very nice build, as your Amsterdam is as well 👍👍
Good work.
Was in Stockholm the week before Christmas, lovely city, the Wasa Museum is incredible. Best regards Doug 😎
SPECIFICATION:RG65
Total lenght:650mm
Beam:150mm
Mast height :915mm
Overal height: 1338mm
RTR total weigh:1290g (without 4pcs AA batteries)
Hull material Plastic
Sail material : Mylar
INCLUDED:
*Completed hull with pre applied graphics.
*Two milar film sail sets
*Carbon fiber masts and booms ]2Rigs]
*Zinc alloy ballast and aluminium alloy fin
*Powerful sail winch
*Metal gear rudder servo
*Battery box an On/Off switch for receiver
*AA Nimh batteries 2200mAh for transmitter and
*rc/radio FrskyTaranis 2.4Ghz
i have that same kit i bought just before my daughter was born in 1989. she is undergoing a "fleet rehab & maintenance"
overhaul currently. actually the first true rc watercraft i
started with, after a lifetime of building static models. that kit was of high quality, but has of course been discontinued some years ago. i transferred her from uscg lifesaving station manasquan inlet, new jersey, to uscg lifeboat station ludington, michigan, and changed the hull number from cg-44329 to cg-44345. i served in the uscg in nj, but always wanted to be stationed in ludington, mi. semper paratus!
Mawhera is a bucket dredger buil by willim simons and company
in the Renfrew yard for New Zealand in 1908.
The model is 1.5mtr long and is fully working by radio control.
This fantastic model was scratch built by John of the Solent Radio Controlled Model Boat Club. Here it is seen sailing in light winds on Setley Pond in the New Forest, UK.
She took about a year to construct and is now into the third year of sailing. The boat is based on the period 1929/34 when "Bobby" Somerset owned her, he won the Fastnet race twice and finished second once, infact she is the only boat to win the Fastnet three times. She is based on the river Hamble and is owned by Dauntseys school in Wiltshire and is regularly raced by the pupils there. The model is approximately 1:15 scale.
In 2013 the full size Jolie Brise celebrated the centenary anniversary of her construction by the Paumelle yard in Le Havre in 1913. The world famous, gaff-rigged pilot cutter was the last boat to carry the royal mail under sail and has won the Fastnet Race three times, including the inaugural race in 1925. in 2015 and 2016 she was the overall winner of the Tall Ships Races.
Jolie Brise is owned, maintained and sailed by the pupils of Dauntsey's School. For more information about Jolie Brise go to,
www.joliebrise.com
(apologies...just seen this vid was already posted by Dave M😁)
Muito bem! Gostoso 👍😎
In the 1990s I worked on the carrier Minas Gerais and the Niteroi class frigates on the Ilhas do Cobras in Rio. Happy days! 😉
Best wishes from Munich. 😎
This Aerokits "Sea Commander" was built C.1961 by my father with ED Mk4 diesel engine and his own scratch designed and built radio/receiver ( I have all his design documents). He raced it successfully in the early '60s but hadn't used it in years when I inherited it. Have now replaced the IC motor (mothballed carefully) with MFA Torpedo 500 but it runs a bit slowly ("river cruising" scale speed). Looking to obtain semi-planing but not racing speed.
Thanks Johnlikessailing. However, I have now replaced MFA 500 with Mtroniks 600 and got much better performance, although I'm not sure how much of this was due to the change of motor and how much was due to rectifying the slippage due to a loose grub-screw on the connection between the motor drive shaft and the universal joint that I found when I removed it! (Lesson - beware of alternative causes of problems!) Now I just need to sort out a leak - hardly a surprise on a 50 yr old model! Hey-ho!
Video of the first start-up and test of "Sweet Sue" in dry dock. All went well ! Had two sails on water since.I built this vessel from scratch using a pre made clinker fibreglass hull purchased from Mini Steam Australia. The engine is an oscillating twin cylinder and the boiler is a 3" Centre Flue Gas Fired Vertical Boiler from "Miniature Steam". The gas tank is a 1-1/2" vertical refillable GasTank also from Miniature Steam Pty. Australia. The vessel is radio controlled with the skipper appearing to control the rudder. it has a smoke generator and a rc controlled steam whistle.
This boiler runs at around 60psi ! do you think that is a little high ? I was a little concerned by the amount of steam that is being generated as you may have noticed in the video. I can adjust the intensity of the flame inside the boiler so that a lower head of steam is generated, what do you think ?
Kevin
Hi Kevin
Yes that's what I do. I am always amazed at the power the oscillator generates and once rotating very little steam is required to maintain speed. Then again it's not for windy or rough conditions. I would try gradually reducing the pressure until the engine show signs of stopping and then increase by a couple of psi to ensure safe running. You do not need to run the boiler at its max rated pressure when the escape valve will be opening just at a level that replaces what the engine uses. Can we have another video with the steam whistle sounding?
Dave
Decided to sail the Solent so took some video to share. Uses 2 Bhuler 12v brushed motors with 4 bladed 45mm PropShop props and 12v 12AHr SLA. Twin Electronize ESCs. Radio is Futaba 6Ex but I will probably change to the Taranis so I can get better control using some bespoke Tx settings to co-ordinate the props and rudder.
Lifeboat crewe had been on a night out so not quite vertical. Aplogies for the shaky video, it's difficult to sail and video at the same time.
very nice boat and yes it is difficult to video and sail at the same time ! try to get someone else to steer while you video !! using a tripod is best. Les Breame
Thanks for your feedback.
I was using a monopod so I could pan and follow the model. I agree the tripod works much better. All my fellow sailors were otherwise engaged unfortunately.
Dave
I built this vessel from scratch using a pre made clinker fibreglass hull purchased from Mini Steam Australia. The engine is an oscillating twin cylinder and the boiler is a 3" Centre Flue Gas Fired Vertical Boiler from "Miniature Steam". The gas tank is a 1-1/2" vertical refillable GasTank also from Miniature Steam Pty. Australia. The vessel is radio controlled with the skipper appearing to control the rudder. it has a smoke generator and a rc controlled steam whistle.
scratch built 34ins x 13 ins x5ins draft of 1948 ringnetter these are models radio controlled glorious b 428 bountiful b 377 misty isle b 55 current build is cygnus gm 33
Good work.
Was in Stockholm the week before Christmas, lovely city, the Wasa Museum is incredible. Best regards Doug 😎