Found this on youtube and had to copy it onto here, the fine detail and the two figures in the boat are unbelievable. A standard to work up to hopefully. A pity the boat is not on the water, can't get over the incredible detail. Enjoy.
I bought the Moorcock from a fellow boater and decided to rebuild her as the Moorcock. The hull was stripped bare and the prop-shaft tube removed and completely remade with a new prop. The hull was then repainted and the life boat and davits added The superstructure was cleaned up and remade with a Robbe spring loaded grappling iron added to the rear deck.She is powered by a 24v scooted motor salvaged from a garbage bin and has 4 x 12v 7amh SLA's to provide power. She is a good strong vesel to sail and is often used as a recovery tug.
Just renovated this one not been used of several years, I need to get back into sailing, was running on a 400 size motor now on a outrunner Mystery D2632-100 and it seems to go very well, will post it on the water later.
Hi BOATSHED,
The wooden block is screwed and araldited ti the keel and supports an Aluminium bracket designed for holding a Brushless motor in an Aeroplane, use what’s available I always say.
The coupling is Silicon tube fitted to brass universal coupling fittings and because the way brushless run is very quiet compared to a normal Unversal Joint assembly.
Will post it running shortly.
Thanks for you interest. Graham
Ahoy Maties! it's been a long time since my last posting. Happy 2019! I just completed my new scratch-built boat "Electric Barbarella". I tried to recreate (with some liberties) one of my favorite boats of all time, the 30-footer Chris Craft Sportsman built during the 1970s. it measures 24 X 8.5 inches. it is powered with a 9.6 NiMH 4200 mAh battery "nunchuck" pack (like the one used for paintball guns), brushless motor attached to a 30A Mtroniks Hydra controller and a 30mm M4 3-bladed brass propeller. The hull (my own on-the-go design) was made out of Balsa wood which later I fiberglassed. For the superstructure I utilized 2mm ABS plastic sheet material. To my surprise the boat turned to be a very stable and forgiving platform. I really feel a very close connection to this vessel as it is my first own hull design.😁
This Swede Johnson and his yawl and its captain, Popeye. Swede pasted away several years back, I wanted to post this in his memory. He scratch built all of his boats over the years and was well know for his leading edge designs like the US1 Meters and Marbleheads. He taught me to scratch build boats and sails. Yes, Popeye's arm moves with the acting tiller.
"Searcher" was a Graham Goodchild design offered as a free plan in "Model Boats" in December 1981. Here is my version , many years in the building and finally nearing completion. Access to the hull on the original design was via a hatch above the cockpit - I had no faith in my ability to make it water tight so went for removable grp. hatches. The model is activated by a reed switch just in front of the rear hatch, which saves me the hassle of doing/undoing all the nuts (this had not been fitted when I took the first picture). The rear hatch gives me easier access to the drive coupling. The name "Nimbus2" is in honour of one of Dan Dare's spaceships in the Eagle comic. The third picture shows the ship in its final state with added 'enhancements' and working lights.
Scratch building a barge for my tugboat Miss Doris to push. May deck it over to become a tank barge I used to push on the Delaware River. if
i do deck it over, I'll hinge the deck to make use of the space for my RC gear.
Thanks for posting the photo of the barge build, gives me some ideas.... I have some tugs in progress, but no barges. I like the way you framed the hull. Joe
This is one of the limited edition Sirmar kits that was produce in the early 1990’s.this model was made by a friend of mine who’s a dockyard fitter and turner it was made about twenty eight years ago. Based on a tug that I worked on in and around Portsmouth harbour. This model has a working voith unit opening engine room skylights. Working lights, removable deck hatch to get at the unit like the real boat, the superstructure and gun whales are made from plasticard. The fender was made by a friend to the same type as used on the tug. The wheelhouse is copied like for like. The towing hook is copied from photos and slips like the real one. in all my years I haven’t seen another one like this . Sirmar made twenty numbered hulls as kits .
