Graham Royle joined the Model Boat Website last summer, returning to modelling after a 45 year break. It was a display at Buxton Model Boat Club last year where he spoke with one of the members that got him started again.
Graham who is now a member of the Buxton Model Boat Club started his latest project "Bionic Bill", only 3 months ago at the beginning of lockdown.
What resulted is truly magnificent working model example of engineering, woodworking, electronics, perseverance and total dedication ! .
Well done Graham !.
PS - Remember, set video resolution quality to HD 1080p (Bottom right cog wheel).
Show less
A bit windier this time (10-15 mph) but it's not built to sit on a shelf, so having made a few adjustments I thought I'd risk it. It tried playing submarine a few times after a spin but handled the wind ok till trying to get back, - tried to weathervane back out, so ended up power on beaching. Lots of fun in the sun, -still more adjusting to do, ie get it steering straight by itself and limit the drifting slightly.
Shouldn't be too much trouble Martin it if do it like the flash job. Looks like an accessory option that goes on as a unit.? I can get some thin alloy sheet at the hardware I think which might do, or even plastic sheet eg ABS or similar.
JB
Your Speedline model barge looks very good in the water and looks as if she is sailing extremely well. I've always thought that this design was a bit small to carry three headsails, but looking at yours, I think I must revise my opinion. Would like to see her competing in the AMBO class for 30" barges. She would qualify despite being shorter.
Here we have two terrific RC models of the Motor Vessel CUMBRAE built by two Buxton Model Boat Club Members - No1 is Blue belonging to Roger and the second belongs to Paul..
The original vessel was built by George Brown & Co in 1936 for Clyde Pilotage Authority, Glasgow.
Hi Kevin. I haven’t seen the owner of that vessel recently but I recall he said it was running on a brushless motor as used in motorised skateboards powered by 12v SLA battery with a 60mm prop. Hope this helps
Made a few adjustments, including alloy braces for the motor pylon (was a bit flexible and I think it was twisting slightly under power. Rudder linkages still need tightening up (crappy HK clevises,-probably will fit ball links) but it was a bit better this time (apart from a high speed excursion into the rushes at the end,-no damage, got in the shadow and brain couldn't calculate time, angle and distance😁) Battery was down to 7.5v/cell after all this (4000mAh 3s) so not a bad run time. Only had full throttle for about 3 secs total, -too hairy!😁 Put in expo and dual rates but that didn't do much (too much rudder slop to be accurate). Back to the mod shop.
Hi JB - the ones we have are at the most 2mm - cut one on the laser last week for a stencil for beehives - was not talking about the the thick nylon type boards ,
Hi. This is my 2nd scratch built boat since lock down began. The first was the H S L 103 finished 6/7 weeks ago. Still waiting to be tested outside of workshop. This one is built on a fibre glass hull,and has a length of 44 inches and a beam of 16. My power plant is twin out runner motors purple power. 600kv, running through twin 70 amp ESC and with 4 cell 5000 amp lipos feeding them. All accommodation is made using 6 mm three ply. And every fitting you see on the boat was scratch built by me. Lighting system is 12 v grain of wheat .props are three bladed brass 45 mm by prop shop
A test post on behalf of redpmg.
The engines are built by a mate of his.
"The boats are built by a 90+ year old gent by the name of Alan Raubenheimer, who used to make Rose Pop Pop Boats - used to advertise in MB etc.
Now into his 90s he has finally given up production."
Here goes🤞
Doug
It woiks 😊; just ignore the 'Invalid file' notice and click the blue magnifying glass and then the download button.
Run with Windows Media Player.
When it opens Press F11 for full screen or drag a corner with the cursor to enlarge.
Resolution is not too good I'm afraid🤔
Despite the music the action takes place in SA not Hawaii!😉
Hi Doug, I finally figured out how to open this - it was well worth persevering with, this has a real feel good factor especially with the music and I like his R/C, and a steam outboard engine - brilliant.
Changed from the single rudder to twin rudders (came up with a solution without going shopping) and have better steering now (probably too good😀) might need to reduce movement in the TX set-up. Will behave differently on the water as in the vid it's on a 30deg slope making it hard to steer, plus the slippery plastic strapped to the hull. Does good donuts though!😁
Looks like you’re having fun!! Airboats are tricky little beasts aren’t they? I have a little Hobbyking Swamp Dawg which is okay, but in windy weather she’s all over the place.
Hi Cash, lots of fun, and hopefully we are allowed out next week (lockdown to level 3 from 4)
so might be able to do some drifting with a bit more space on the big sports grounds.😁 Bit confined in my yard due to full size boats, trailers, trees etc, too much to hit😁
JB
Thanks for doing the video, and spending all the time editing the clips. Much better than anything I could do with my handheld camera.
Graham93