Its maiden voyage took place at the Knap at Barry South Glamorgan. with the VGMBC.
It's a Robbe kit "San Diego" built by a chap on this website "sharpy1071"
Leopard 4074-1400Kv water-cooled motors 100A Mystery ESC's.

After a few teething problems with transmitter setup, everything went fine.

This is another step forwards!
All the electronic parts arrived last week! The good news is they are all working and I knew how to assembly thanks to the info I found in this website!

This poor boat has been in several attics over the last 40 years and I finally I decided last year that I would get to grips with it and do my best to have it's construction finished. This website has been very helpful and so a big thank you to all you talented chaps out there for being such an inspiration.
Although I now see mistakes dotted here and there, I was proud to raise the RAF ensign on the 3rd of March and then be able to say that the job was done. Granted it's only a static model and I'll need a lot of help and advice if ever I'm to install an engine but I thought it would be a good idea to share my efforts, mistakes included.

Police (Scotland) 1.12 scale. made from a Semi-Kit by Models by Design, built 2014.
This is modelled from the interceptor42 range by Safehaven Marine. This is my first full build of a model, having only done restorations previously.
Model length is some 42 inch, beam of 12 inch. (106cm x 31cm)
Power is by twin E-Max BL2826 Brushless motors and 1, 80amp speed controller running on 2 NiMH 7.2 volts.
Fitted with Action electronics Police siren, and with detailed rotating blue lights and searchlights.
I sail this at Cold Knap Lake Barry Vale of Glamorgan, and I am the Founding member of the Vale Of Glamorgan Model Boat Club.
Also included is my Portland Pilot interceptor 42 which was the original prototype from Models by Design which I purchased and added lighting etc, this runs on Brushless motor running on 12Volt lead acid.
Visit our website at http://vgmbc.org/

just a few more shots and I would like to say many thanks to the people that has commented and gave me some hints and tips through the build from this very good website,well done Modle Boat Website

Help, Has anyone had trouble with the robby bow thruster recommended for this model,mine has been used about three times and it keeps siezeing up I am not very Impressed with them,can anyone reccomend a good one that I can fit in its place.

This model was built from a model slipway Tamar kit. it was modified substantially.all rails are soldered brass. info was from the website of Peterhead R.N.L.I. Station were there are excellent photos. The models engines are thumper motors 4240' at 900kv and run on three cell lipos @ 5000ma. Which give me at least an hour. With a speed of at least 10 mph, which lifts her bow out of the water,way passed the bow thruster , which is a graupner 400. Radar works through an old servo . Flashing blue light on mast. Running and accommodation lights. These boats are normally red below waterline however Scarborough life boats have always been white below the waterline. The crew are star war figures modified with plastic putty and a sharp knife. Not an easy build but very enjoyable. Eric Plaxton was the chairman of plaxtons coaches, and platoons building services. He left 9 million pounds to the boro of Scarborough, and 3 million to scarborough R.N.L.I., for a new boat .

A recent purchase from a buy and sell website, soon for restoration, (along with the rest!!!!!!)

Hi" to all model boat builders. I thought I would add my new project to this fireboat website for all to see ! I bought this from fleabay as a total wreck. She is a rare Scratch built from a plan of a Walton Thames RAF ASRL launch at 36 inch long & 8 inch wide.took me approx 6 months to do the rebuild. Brush painted with 5 assorted colours with decals working lights ect.
Walton Thames is now running on a new Johnston speed 600 electric motor. 50 amp speed controller 45mm pitched propeller.A 6 volt at4.ah which gives good running time & good scale speed. Photos are taken at Eaton park Norwich England. Enjoy. 😊
My next project will be a 1950s Aerokits/Keilcraft Sea hornet. " So watch this space "

Built from light ply and balsa from a plan available on the Model Hovercraft Association website (under resources) www.modelhover.org it is powered by two 540 brushed motors with dedicated speed controllers.
This model has now been sold and replaced with a newly built Canadian Coastguard Griffon 2000TD built off a Mark Porter plan but using two Graupner Speed 600 motors, one powered by a 3000 Li-Po battery for thrust and the other on a 7.2v Ni-Cad for lift.

HI to all you Fire Boaters,
I have decided to finally bring my Fireboat out of the closet and up for inspection.
This is the first of my many boats I am showing, I will probably show others in the future.
I started to build her back in 2006 after being off work and having a shoulder operation. She was not going to be a R/C boat, just a bit of something to do whilst on recovery.

I have a 34" still in the box unmade, purchased back in 1994 from Aerokits.
I drew round all the parts and then shrunk them on my scanner. She is 27" long I think that's
just fraction over 1/20th scale . She is almost all balsa except the 2 under skins that are balsa laminated with 1/64th ply. The hand rails are 1/4" balsa blocks I cut from a strip and the rail is ally tubing.
The mast is made from plastic strip from packets from the model shop.

When I returned to work she was put into the shed and left unfinished.
I stumbled across the Fireboat website and registered in 2009 when I was off work once again. This then made me think more about working on her again and I decide to turn her into an R/C model. So out she came and I fitted an Electomax Delta 480bb motor and a M3sonik esc.
I also purchased a couple of Robbe fire monitors, put them together shortening the nozzles and cutting the bottom of the base of to try to look a bit moreto scale. I know they are not the correct type but if I want to go down the road of getting them working then these ones will.

Then off I went to Wilkinson's and bought some paint. Then set out to paint her, as I brushed on the paint it seemed to be drying almost as quick as I was painting her. Dragging the paint I had just put on with next brush stroke. What a TOTAL DISASTER !!. I gave up on her and back into the shed she went.

2010 arrived I started again rubbed the paint down a bit and bought some Tamiya spray acrylic and started spraying, underside red, it seemed look all right. I used a nice new roll of low tack masking tape, taped up the underside and the decking and sprayed on the black on the sides. I thought that look all right. Took off the masking tape, which also took off the red paint and the dope from the decks. Another DISASTER. Back in the shed she went once again.

A couple of months went by and I was up in Norfolk on my own boat and watching the workers in the boatyard, ideas came to me and when we returned home, out she came and I repainted the sides
and then with red oxide paint I painted her undersides to make it look like antI foul paint. I used some white stripe to cover the join of the two different paint colours.
I had bought some roundels in Anglia Model Shop in Gorleston and some lettering in a shop in Norwich and after painting put these on.
Not looking fantastic but passable I was a little happier with her, but still not satisfied, back in the shed she went again.

Now after so much nagging from my brother out she has come, I've started again. He talked me into changing and trying a brushless motor and a smaller esc he had in his tool box from his helicopter he was shelving as its rota head was damaged beyond repair.
I have now fitted them and if they work I will change the esc to a forward/ reverse esc in the future at some point.

Sea trials are still away off more than likely in the spring, because the decking has yet to be painted. That will be the next job.

I think that's all for now, as I have probably bored you all to tears. I hope update as I progress further.
Just to let you know I'm Tom (alias BOATSHED).

The boat is a scratch built and started life in the shed. it is a semiscale model at aprox 36inch, built with balsa wood.It is full remote control and fitted with two Mtroniks Vision 600 motors one 12volt 7ah battery,one seasprint esc.
It was built as a fun boat so I could sail with my friend Peter thomas with his variuos boats.
Several things have now been added since this boat was first built, IE smoking stacks, fireing torpedoes and magnetic pickups for colecting them. Also has working radar/moving gun + a home built bec.
Flag poles and flags/compas has been added on the superstructure.
Each motor draws 6amps at full power, I have measured the speed from one point to another at a spacing of 60mtrs, and timed at 15 seconds, but this is a bit fast for this boat as she starts to plane out of the water.
We sail her at New Brighton lake on the wirral most wednesdays. As the weather is now a bit cool I have just purchased a simular model to this at 1:48 scale 110ft island class USCG Patrol boat so I can look at them both in action when the weather picks up. Anyone wanting info can contact me via this website.