I like Douglas Adams books. ..(and Terry Pratchett too)
But I was most attracted to Gusty Cat ...
So.. Model of thames barge , build according to modified plans of sb Lady Daphne in scale 1:28 (length cca 1 meter ).
it will be again a model with an auxiliary motor, staysail class.
I am currently grinding the laminate hull with several layers of putty.
It is an ungrateful job.

By way of a contrast I found some video from 2014 at the St Helens Open Day.
Beautiful scale model Crash tender operating at some speed.
Nostalgic or wot.
Great model Paul and well sailed
Dave

1/48 scale scratch built models of RNZN frigates RC

1/50 scale scratch built model on a GRP hull. Powered by one electric geared motor and chain driven drive to paddles. Sail her on Mary Stevens Park Pool, Stourbridge.
Built her ten years ago over a period of 5 years

Scratch Built 1:32 scale Dover Harbour Board Tug, DHB Doughty.
The main hull is a standard Damen hull purchased from Mobile Marine Models, see their website for Portgarth.
the hull is fitted with 2 x T12 Motors for the main propulsion,2 x 60 degree kort nozzles for steering, with 2 x purpose made brass props.
Also fitted is a 12v Graupner water pump for the working fire monitor and Fwd spray bar, 2 x Mtronks 15 amp ESC's, Futaba steering servo and Futaba 40 MHz Receiver.
Approx Dimensions including fendering Loa 41" Beam 14"

Recently built from an Aeronaut kit, this is a 1/24th scale Pilot Boat based on a German design. Powered by two 540 brushed motors with 3 bladed brass props it attains something like scale speed. The colour is Volkswagen Bright Orange, courtesy of Halfords and the non-slip deck is acrylic green mixed with silver sand then covered with a silk finish varnish.
The boat was filmed at an illuminated regatta staged by Bournville Model Yacht and Power Boat Club on their lake in Bournville, Birmingham
%u2003

Sunday sailing and a chit chat down at NorthWest Scale Model Boat Club,Squirrel Lane,Horwich,Lancs.Thought I'd put on my first video,just myself and husband watching a couple of the guys on a pleasant Sunday afternoon.

This video shows four New Zealand frigate models, at 1/48 scale, radio-controlled, HMNZS Canterbury leads, then Waikato, Otago and Taranaki. All models built from scratch, from Navy plans.
Build time about 6 months each. 1970's era idea based on a photo of these ships taken sailing in Wellington Harbour.

HMS Nelson, scratchbuilt to 1/8" scale. Powered by two motors driving twin contrarotating shafts with three blade props. She sails on Lake Lisgar, Tillsonburg, Ontario.
I decided on Nelson as she took part in Operation Pedestal, from which I made a 1/216" waterline model of SS Ohio, the ship that saved Malta.
She took a little over 600 hours from solid chunk of basswood to launch. Probably info collection took as long!

1/12 scale kit from Metcalf moulding the most difficult part on this model was the rudder section,you have got to get it right because once fitted the deck goes on and there is no turning back,it has 2 X 550 motors on 8.4 sails very well,not to fast but not to slow either,I sail at king Lear model boat club in leicester when I get a chance,lovely big lake all type of vessels on water,eg"
: steam,electric,ic yachts what ever you like

Police (Scotland) 1.12 scale. made from a Semi-Kit by Models by Design, built 2014.
This is modelled from the interceptor42 range by Safehaven Marine. This is my first full build of a model, having only done restorations previously.
Model length is some 42 inch, beam of 12 inch. (106cm x 31cm)
Power is by twin E-Max BL2826 Brushless motors and 1, 80amp speed controller running on 2 NiMH 7.2 volts.
Fitted with Action electronics Police siren, and with detailed rotating blue lights and searchlights.
I sail this at Cold Knap Lake Barry Vale of Glamorgan, and I am the Founding member of the Vale Of Glamorgan Model Boat Club.
Also included is my Portland Pilot interceptor 42 which was the original prototype from Models by Design which I purchased and added lighting etc, this runs on Brushless motor running on 12Volt lead acid.
Visit our website at http://vgmbc.org/

This 1/12 scale model is based on the Aerokits Solent Class lifeboat. Over the past 5 months it has been under going a major refit. I originally built the boat about 35 years ago and got the "bug" again last September. I've done the best I can to make a silk purse out of a sows ear.

Its powered by two MFA Torpedo 800 electric motors. power comes from two lead acid batteries, each rated at 12v 7Ah. Control is provided by two Mtroniks Tio ESC. The twin spade rudders are linked to one servo. Each ESC has its own receiver. I found that one receiver, using a Y lead, could not continuesly keep the two ESC supplied with a signal and they kept going into Failsafe mode alternately. I got round it by binding two receivers to the one transmitter. Within the engine compartment is an automatic bilge pump. Two probes detect if/when the water level rises to a certain amount in the bilge and activates the pump.

The model has working radar scanner , navigation lights, search light and blue flashing light.

If you want to see the boat in action please go to my You Tube page at https://www.youtube.com/user/coljacktonvale