My own design deep "V" hull with upper-works loosely to 1:15 scale replica of the Mitchell 31 boats previously used by various Hampshire constabularies in and around the Solent. The intention is to fit this model with a working, rotating, radar scanner using the servo motor and gearbox from an old video camera lens system; working lights including flashing blue police lights and a sound-alike "wee-wah" siren - just for the hell of it (and because I can)! Technical details: Hull length: 867mm. Construction: GRP layup with 1.5 and 3mm ply and balsa deck, cabin etc. Motor: MFA Torpedo 850. Propeller: X50mm plastic. Battery: 2 x three cell LiPo pack in parallel. Speed controller: Mtroniks Viper 25Amp. Radio: Hobby King 2.4GHz.

This model was scratch built from US Coast Guard plans. The boat is constructed of balsa wood and the hull coated with fiberglass resin. All the deck gear is scratchbuilt from brass, the propellers, led's and figures are the only commercial parts. Scaled at 3/4=1 foot the model measures 42 inches in length.
It's powered by a Pittman 12 volt motor and controlled by a 4 channel radio. Working features are running and spot light, siren with flashing blue light, sweeping radar antenna and deck lights. Built in 1985 the model the lifeboat is accurate in appearence for that time period.(The prototype has been modified since).
The actual lifeboat is attached the the Coast Guard's Motor Lifeboat School at Cape Disappointment and is one of four boats of this class.

Hi" to all model boat builders. I thought I would add my new project to this fireboat website for all to see ! I bought this from fleabay as a total wreck. She is a rare Scratch built from a plan of a Walton Thames RAF ASRL launch at 36 inch long & 8 inch wide.took me approx 6 months to do the rebuild. Brush painted with 5 assorted colours with decals working lights ect.
Walton Thames is now running on a new Johnston speed 600 electric motor. 50 amp speed controller 45mm pitched propeller.A 6 volt at4.ah which gives good running time & good scale speed. Photos are taken at Eaton park Norwich England. Enjoy. 😊
My next project will be a 1950s Aerokits/Keilcraft Sea hornet. " So watch this space "

This boat was scratch built from Harold Underhill plans, available still from Brown,Son and Ferguson. The hull was mahogany on 6mm ply frames. The engine was a Caton from Maxwell Hemmens supplied bya gas-fired Cheddar Puffin boiler. The propeller was a two inch four bladed brass job from Rivabo I think. The displacement of the boat is 25lb- a bit of a lump to carry to the water but it does work well once in the water. She has now been converted to electric using a MFA geared 540 type motor witha 7.5ah lead acid gel cell. Looking again at this video I begin to wish I had left it as steam but there is something to be said for 'switch on and go'.
I started building the boat in the mid nineties and it has now had a repaint- it always been a favourite. This video was taken in the early noughties at Crealy in Exeter.