two more photos of my fire boat as I said before the crew are not right but ok all scratched built except hull payed A£35 for it the pump is from a astra car A£2 works a treat gordon very good site was told the hull is 30 odd years old

Scratch-built paddler by Pete Smith. Model was built fom Richard Webb's MAP plans and electrically powered. Pete added a redundant IOM keel cut down to provide extra stability and the boat now performs very well having suffered the vices of most model paddle steamers. The boat is 54 1/2 ins long and 13 1/2 ins beam, plank on frame construction.

This boat was scratch built from Harold Underhill plans, available still from Brown,Son and Ferguson. The hull was mahogany on 6mm ply frames. The engine was a Caton from Maxwell Hemmens supplied bya gas-fired Cheddar Puffin boiler. The propeller was a two inch four bladed brass job from Rivabo I think. The displacement of the boat is 25lb- a bit of a lump to carry to the water but it does work well once in the water. She has now been converted to electric using a MFA geared 540 type motor witha 7.5ah lead acid gel cell. Looking again at this video I begin to wish I had left it as steam but there is something to be said for 'switch on and go'.
I started building the boat in the mid nineties and it has now had a repaint- it always been a favourite. This video was taken in the early noughties at Crealy in Exeter.

Thames Fire Service fire boat,this has twin 540 motors,12v pumps(not working yet) and nav lights.Fibreglass hull with wood decks etc.
The model is quite old and has been a static for some time until it fell into my hands,the name Gamma on the bow.
Looks pretty much scratch built and a very good job whoever did it.
Sails occasionally at Gang Werily Fawley Hants.
This is another work in progress,hopefully we will make it to a fun-day maybe next year.

As the name suggests, this is a scratch build sort of tug. The hull is based on a (very small) Pinacce photo of a model steam open boat. I did not fancy making a steam unit (time is the problem) and I had had an idea of doing a tug for quite a while. I liked the shape so started in the usual way. I wanted to keep the cost down and so almost everything is scratch made, though a few bits were "borrowed" from where I work - an engineering firm. Most of the work on this model is more of an experiment for my next tug which will also be from scratch but will have everything working. The "Archer". The winches are at the moment none working, the doors do not open, I have no idea if there is any tug that looks anything like this but I am very pleased with the result. I hope you like it.

This model was built from scratch except for the fiberglass hull, using styrene. The drives are Graupner VSD's and the 10 fire monitors are powered by BMW windshield washer pumps. The radio is a Spektrum DH 6 with a twin stick modification and fitted with a switch 8 to individually operate the monitors.

this boat started as a kingston mouldings hull of the
p28 fast patrol boat you get hull and plan the rest is up to the builder it is twin shafts twin rudders one speed controller a jel 6v 7amp battery AND two
545 motors

The boat is a scratch built and started life in the shed. it is a semiscale model at aprox 36inch, built with balsa wood.It is full remote control and fitted with two Mtroniks Vision 600 motors one 12volt 7ah battery,one seasprint esc.
It was built as a fun boat so I could sail with my friend Peter thomas with his variuos boats.
Several things have now been added since this boat was first built, IE smoking stacks, fireing torpedoes and magnetic pickups for colecting them. Also has working radar/moving gun + a home built bec.
Flag poles and flags/compas has been added on the superstructure.
Each motor draws 6amps at full power, I have measured the speed from one point to another at a spacing of 60mtrs, and timed at 15 seconds, but this is a bit fast for this boat as she starts to plane out of the water.
We sail her at New Brighton lake on the wirral most wednesdays. As the weather is now a bit cool I have just purchased a simular model to this at 1:48 scale 110ft island class USCG Patrol boat so I can look at them both in action when the weather picks up. Anyone wanting info can contact me via this website.

46 inch Crash Tender rescued from E-bay. Currently in the process of total restoration and have had to scratch build the entire super structure. Have fitted a Merco 61 engine with tuned pipe (the noise is awesome).

Have gone for it with the radio control- - employing a Robbe F14 plus an extra 8 channel module with decoder. So far extra controls are : each monitor (scratch built using brass pipe & sheet) left & right (using Robbe pulley set to give me 270 degrees travel), two Irvine water pumps, (real car) hooter, winch (using gearbox from Maplins) and movement for jib and search light.

puffer scratch built made from old wardobe plywood
for the frames then plated up in thin ply like it would be when built looks nice in the water.

puffer scratch built made from old wardobe plywood
for the frames then plated up in thin ply like it would be when built looks nice in the water.

this model was made by me from scratch of the london tug Ionia 56 inches long 12inch beam she has a bow thuster fitted to help the steering nav lights and cat diesel sound generator and its very heavy thats why its not in the water very often I getting to old to lift it in at 73 its a young man boat the hull is fibraglass but it looks so well in the water .