I built this 1/125th scale Amati kit of the Titanic over two years from 2016. it has enhanced etched brass details from Minibrass. Conversion for radio control involved making the hull waterproof with multiple layers of fibreglass cloth bonded with epoxy resin as well as the installation of a drive train and RC gear. With only a tiny rudder, steering is dependent on a mixer unit controlling the differential speed of the propellors.
My newest build , Billing Boats Fairmount Alpine
i start building for one years ago , i have mount bowtruster
and start with all lamps and things , i going to mount an radiocontrolled winch on deck and radiocontrolled cranes
more pictures is comming
Welcome aboard jugge, very nice build, as your Amsterdam is as well 👍👍
Good work.
Was in Stockholm the week before Christmas, lovely city, the Wasa Museum is incredible. Best regards Doug 😎
Mawhera is a bucket dredger buil by willim simons and company
in the Renfrew yard for New Zealand in 1908.
The model is 1.5mtr long and is fully working by radio control.
This fantastic model was scratch built by John of the Solent Radio Controlled Model Boat Club. Here it is seen sailing in light winds on Setley Pond in the New Forest, UK.
She took about a year to construct and is now into the third year of sailing. The boat is based on the period 1929/34 when "Bobby" Somerset owned her, he won the Fastnet race twice and finished second once, infact she is the only boat to win the Fastnet three times. She is based on the river Hamble and is owned by Dauntseys school in Wiltshire and is regularly raced by the pupils there. The model is approximately 1:15 scale.
In 2013 the full size Jolie Brise celebrated the centenary anniversary of her construction by the Paumelle yard in Le Havre in 1913. The world famous, gaff-rigged pilot cutter was the last boat to carry the royal mail under sail and has won the Fastnet Race three times, including the inaugural race in 1925. in 2015 and 2016 she was the overall winner of the Tall Ships Races.
Jolie Brise is owned, maintained and sailed by the pupils of Dauntsey's School. For more information about Jolie Brise go to,
www.joliebrise.com
(apologies...just seen this vid was already posted by Dave M😁)
Video of the first start-up and test of "Sweet Sue" in dry dock. All went well ! Had two sails on water since.I built this vessel from scratch using a pre made clinker fibreglass hull purchased from Mini Steam Australia. The engine is an oscillating twin cylinder and the boiler is a 3" Centre Flue Gas Fired Vertical Boiler from "Miniature Steam". The gas tank is a 1-1/2" vertical refillable GasTank also from Miniature Steam Pty. Australia. The vessel is radio controlled with the skipper appearing to control the rudder. it has a smoke generator and a rc controlled steam whistle.
This boiler runs at around 60psi ! do you think that is a little high ? I was a little concerned by the amount of steam that is being generated as you may have noticed in the video. I can adjust the intensity of the flame inside the boiler so that a lower head of steam is generated, what do you think ?
Kevin
Hi Kevin
Yes that's what I do. I am always amazed at the power the oscillator generates and once rotating very little steam is required to maintain speed. Then again it's not for windy or rough conditions. I would try gradually reducing the pressure until the engine show signs of stopping and then increase by a couple of psi to ensure safe running. You do not need to run the boiler at its max rated pressure when the escape valve will be opening just at a level that replaces what the engine uses. Can we have another video with the steam whistle sounding?
Dave
Decided to sail the Solent so took some video to share. Uses 2 Bhuler 12v brushed motors with 4 bladed 45mm PropShop props and 12v 12AHr SLA. Twin Electronize ESCs. Radio is Futaba 6Ex but I will probably change to the Taranis so I can get better control using some bespoke Tx settings to co-ordinate the props and rudder.
Lifeboat crewe had been on a night out so not quite vertical. Aplogies for the shaky video, it's difficult to sail and video at the same time.
very nice boat and yes it is difficult to video and sail at the same time ! try to get someone else to steer while you video !! using a tripod is best. Les Breame
Thanks for your feedback.
I was using a monopod so I could pan and follow the model. I agree the tripod works much better. All my fellow sailors were otherwise engaged unfortunately.
Dave
I built this vessel from scratch using a pre made clinker fibreglass hull purchased from Mini Steam Australia. The engine is an oscillating twin cylinder and the boiler is a 3" Centre Flue Gas Fired Vertical Boiler from "Miniature Steam". The gas tank is a 1-1/2" vertical refillable GasTank also from Miniature Steam Pty. Australia. The vessel is radio controlled with the skipper appearing to control the rudder. it has a smoke generator and a rc controlled steam whistle.
scratch built 34ins x 13 ins x5ins draft of 1948 ringnetter these are models radio controlled glorious b 428 bountiful b 377 misty isle b 55 current build is cygnus gm 33
When in Australia I was taken by the history of HMVS Cerberus, whose hull is now a breakwater in Port Philip Bay. After a lot of research on the internet I decided to build a model of it. it is not totally accurate as I could find no definitive plans. Therefore most measurements were made from photographs and guesstimates of scale from sailors in pics. it is radio control but not, as yet, tried out; still one or two items to be completed: eg mast & anchors. Update all but finished anchors and various
bits and pieces of deck fittings to be placed. New phot shows where we are. The partial print showing below is a painting of HMS Caroline in dry dock. Spent fives years in the RNR here in Belfast on board her.
Hi I live in the Melbourne area and have sailed in Port Philip many times, have seen the hull of HMVS Cerberus, it really is a sorry sight. Your model is fantastic, I thank you for giving me some idea of how she looked in her Hayday. 😊
This was a static model, that the gentleman I got it off had it for two years and when I asked why don't you put it in a box his reply was the box would be to high at 36" so I said to him is it radio control,NO static model only but can be converted,so I brought it and also showed him that if you move the tube slider on the mast it folds(one unhappy chappy),so I set about radio controlling it with a smoke unit(water) and it gets quite a bit of attention at shows because it's different,the model is based on the Queen from new Brighton 1897-1923
This video shows four New Zealand frigate models, at 1/48 scale, radio-controlled, HMNZS Canterbury leads, then Waikato, Otago and Taranaki. All models built from scratch, from Navy plans.
Build time about 6 months each. 1970's era idea based on a photo of these ships taken sailing in Wellington Harbour.
Guess most of you have heard of the Khetanna, Jabba The Hut's sail barge from Star Wars. I looked around on the net and to my big surprise, the search engines did not spit out radio controlled versions of this model. Which made me think, and then decide to built my own.
It is scratch build, based on a "scudder" hull, a design by Glenn G. I printed a few pictures of Khetanna from the net and used those for guidance in the process.
The superstructure is a combination of balsa and ply wood. in the Star Wars tradition, the boat is propelled by a jet propelled engine. To finish it off, a Lego version of Jabba was added for extra detail.
It was a fun and fast project to built, maybe a dozen or so evenings.
(scratch) building is my passion and only sail the boats with my son about once a month. We've got a pond near Newcastle (AUS) harbour which is pretty good (providing there's no weed in it) but the disadvantage of this pond is salt water, meaning a proper rinse of the models is needed after each sailing session. Recently we have moved our sailing sessions as well to the liberty pond in town. The model captures the audience, the vast majority recognize the Khetanna immediately.
Happy sailing.
