Looks great 👍 Same scale as my Belfast and Graf Spee. Shame we can't re-enact the Battle of the River Plate! I live in Munich.
If you ever come to Bavaria .... Cheers, Doug 😎
6ft loa, RC, scratch-built, grp hull. 10 yrs old.
Sold to private museum.
Am building my 3rd RC model of HMNZS Taranaki, Rothsey class frigate. Over past 40 years have built many RN - e.g.
Force H, Med., 1943, such as Illustrious, Sheffield etc.
Refer www.modelboats.co.uk January 2014 issue.
My main request is that I can establish somebody UK with
similar interest, despite my living NZ but unable to attend
your excdellent sights.
This is my 1/24th scale S80 Schnellboot,it has a Metcalfe GRP hull,the superstructure is a mix of 3mm/4mm ply and 2mm plasticard,it has 3 x Graupner 600FG motors that have a 3.1 ratio gearboxes fitted,the props are 55mm witches hat type,and it has 3 x Electronize 30amp speed cont,it has a really good scale speed running on 2 motors but nearly jumps out of the water when all 3 are engaged,It was scratch built from plans,but not by me,I got it in plain grey,I did the paint job and added the crew,I sail her on a pond near to my home in Edzell,
This is GRP hull and a part vac-formed cabin and the rest is scratch build using plastic card! Fittings are from my own range along with the crew. Prop shafts and "A" frames are home made along with the rudders which are to scale form John Lamberts drawings.
Two Groupner eco600 motors are used connected to a 6volt cell lasting around 3 hours running.
This is my second attempt at scratch building using a a grp hull. My first boat was an MTB/MGB built on a Perkasa hull as a semi-scale model. (see All things Rc - Power setups).
This time I have concentrated on keeping things lighter but it still weighs in at 2.5kg!
I have built without plans, relying on internet photos scaled etc using "Photo deluxe" and "Photo Express".
Virtually everything is built from plasticard apart from a 3mm liteply deck.
The dinghy is epoxy resin and microballoons, ths scramble nets are Lego!
Power is again courtesy of Graupner -2, Speed 600 8.4v using lh. and r.h 35mm props. Esc is one of those 50amp ones from the far east. These are far cheaper than the Viper Marine 40 used in my MGB, but slightly heavier and less sensitive at low speeds. Current drain (in the bath!) is up to 30A but this gives a superb on the water pace of an, estimated,8mph. Battery is a 4,600 mAhr NiMh.
(A true scale speed approaching 150mph plus).
I sail it on Ullswater in the Lake district and the Vosper Perkasa type hull shape is superb in the real waves that we get there, flying over the crests and taking aboard No water!
It really looks the part as my photos would show if I could learn how to load more than one! Can anybody help with this?
Hi" there fellow model maker.
You have done a great job on your ASRL 😊 👍 .
I have also had problems in uploading more then one photo on this site ! I dont know why ? it used to be quick n easy but no more . 😯 Albert
Hi,
I thought that my recently finished MTB may be of interest.
It consists of 49" GRP hull ply deck / superstructure. The fittings are from a mixture of ABS and metal, to give a good surface for spray painted finish.
The drive consists of twin 850 motors and twin 50mm brass props, controlled by a JetI Navy 600 on 10 cells, this setup gives excellent scale planing, but with 14 cells the performance is outstanding. I use 4600 capacity and only select the top power run in short bursts, which gives me around 20 minutes duration on one charge.
radio is 2,4 ghz so no bother waiting for a free freq.
hope you enjoy
loz.
Hi. I have just posted asking about the Precedent Perkasa kit. is that what you have built here? What did you think of the kit? Do you think smaller motors might still give planing performance and give longer battery life? I am about to opt for a kit to build and would be grateful for any info to help me choose the right one. You have certainly done a nice job of the build and it tempts me to choose this one
If you ever come to Bavaria .... Cheers, Doug 😎