scratchbuilt from ply and balsa wood powered by two Caldercraft 750 motors to 40mm props only took about three months to build as a winter project its not perfect but was never meant to be more than a toy, 54 inches long and gives a good response in speed and handling

HI this was my winter project the hull was given to me by my son who got it at a car boot sale it had been on fire as it was driven by a petrol engine in now has twin brushless motors with 45mm props but going to put 50mm props on when they come as it needs a little bit more speed Built from a set of plans this my first go at this as I build from kits in the past cabins made out of 3mm/1.5m ply and some 1.5mm balsa wood . Hull was sprayed and the deck and cabins brushed with enamel paint.

This model was scratch built from US Coast Guard plans. The boat is constructed of balsa wood and the hull coated with fiberglass resin. All the deck gear is scratchbuilt from brass, the propellers, led's and figures are the only commercial parts. Scaled at 3/4=1 foot the model measures 42 inches in length.
It's powered by a Pittman 12 volt motor and controlled by a 4 channel radio. Working features are running and spot light, siren with flashing blue light, sweeping radar antenna and deck lights. Built in 1985 the model the lifeboat is accurate in appearence for that time period.(The prototype has been modified since).
The actual lifeboat is attached the the Coast Guard's Motor Lifeboat School at Cape Disappointment and is one of four boats of this class.

Owing it's origin to the RNLI lifeboats of the 19th century, the US Coast Guard 36'MLB saw service from 1900 to 1987. The USCG built over 300 boats of this class in various "mods" spanning it's life history. Constructed of wood and fitted with a bronze keel it was powered by a 4 cylinder engine later modified with a diesel motor. Early powered 36' boats carried oars and sails as auxillary power. My 36500 model was based on the famous Chatham Lifeboat Station in Massachusetts, USA. On Febuary 18, 1952 the CG 36500 rescued the 32 survivors of the tanker PENDLETON during a night time nor'easter storm. Without radio or radar the Coast Guardsmen found the stricken T-2 tanker in the blizzard, taking the crew off one at a time. With each pass of the lifeboat a tanker crewman climbed down a rope ladder and "fell" into the lifeboat. With all on board, the 36500 found it's way back to Chatham harbor much to the delight of the towns people and the Coast Guard! The most amazing fact regarding this rescue was that the 36 footers were only designed to carry 19 people, including the 3 man CG crew, without capsizing.
The model was scratchbuilt of balsa strips and aircraft plywood, using official USCG blueprints. Powered by a 6 volt motor and a 2 channel radio, the Chatham lifeboat is pleasure to run in my local pond.

The boat is a scratch built and started life in the shed. it is a semiscale model at aprox 36inch, built with balsa wood.It is full remote control and fitted with two Mtroniks Vision 600 motors one 12volt 7ah battery,one seasprint esc.
It was built as a fun boat so I could sail with my friend Peter thomas with his variuos boats.
Several things have now been added since this boat was first built, IE smoking stacks, fireing torpedoes and magnetic pickups for colecting them. Also has working radar/moving gun + a home built bec.
Flag poles and flags/compas has been added on the superstructure.
Each motor draws 6amps at full power, I have measured the speed from one point to another at a spacing of 60mtrs, and timed at 15 seconds, but this is a bit fast for this boat as she starts to plane out of the water.
We sail her at New Brighton lake on the wirral most wednesdays. As the weather is now a bit cool I have just purchased a simular model to this at 1:48 scale 110ft island class USCG Patrol boat so I can look at them both in action when the weather picks up. Anyone wanting info can contact me via this website.