We had a good meet and a nice variety of boats. Getting hot as the temperature rose just over 90F. Very light breeze allowed the boats to settle in the water nicely. One member brought his Costeau boat Calypso for its first and sounds like its last water adventure. Howard decided it was too fragile to handle. It features lots of lights and he has worked out a way of using house power to keep the lights running while on the shelf for display. No issues with the boats this time. I guess the storm troopers (Dave and Greg?) kept everything under control. They all came back under their own power. Hope you enjoy the photos.
Lew
IMAI CHEBEC (Xebec) – 1/80 Scale Plastic Sailing Ship Model
IMAI CHEBEC (Xebec) – 1/80 Scale Plastic Sailing Ship Model
Rare Vintage Japanese Kit – Long Out of Production
This model was built from the highly regarded IMAI No. B-296 CHEBEC kit in 1/80 scale. Produced in Japan many years ago and now long out of production, this kit is considered one of IMAI's finest offerings and has become a rare collector's item.
IMAI was famous for the exceptional quality of its molds and engineering. Although this is a plastic kit, the parts were molded with such precision and detail that they convincingly reproduce the appearance of a finely crafted wooden ship model.
The Chebec (or Xebec) was a fast and elegant Mediterranean vessel used extensively by Barbary corsairs during the 17th and 18th centuries. Its sleek hull, pronounced overhangs, and distinctive lateen rig make it one of the most beautiful and exotic sailing ships ever designed.
This model is fully rigged and armed with:
• 20 deck-mounted cannons
• 20 swivel guns
• Detailed anchors, yards, spars, and standing and running rigging
One of the most striking features of the kit is the elaborate decorative carving along the port and starboard bulwarks and across the stern. To highlight these intricate ornaments, I carefully hand-painted every detail using my finest brushes.
The flags were custom made from the lead foil wrappers found around wine bottle corks. After flattening the material, I hand-painted the Algerian corsair designs and shaped them to appear as if they were fluttering in the wind, adding a dramatic and highly realistic touch to the finished model.
Additional features include:
• Ship's boat mounted amidships
• Ornamental stern gallery with gilded relief work
• Open deck grating and finely detailed deck furniture
• Hand-painted decorative motifs throughout
Even after many years, this remains one of my favorite builds. The combination of IMAI's superb engineering and the unique character of the historic Chebec resulted in a model that captures the grace, power, and mystery of the legendary Mediterranean corsair vessels.
Had a nice meet today, albeit a little cool. (Nice break.) Got some photos I am posting here. (The close-up photos of the American Scout are posted in the Media Gallery.)
Suncoast Scale Model Boat Club meet on April 19, 2024
A light turn out and heavier that normal winds limited the number of boats in the water at this meet. Got some video and for the boats that did not "go for it" I have some video of them on the tables. On top of that we had to make two "rescues".
Stunning weather most model boaters would be jealous of. Warm, but not hot! Very gentle breeze. No rain! But not many showed up. Wait 'till the summer comes" No complaints about it being too hot for model boats!
Anyway, I wanted to get back to my trawler with another video. This time on board with my old GoPro. Had some issues with the battery packs slipping inside the hull. I'm going to remove the one for the lighting as I don't use them anyway. Then I will add some fixed ballast in the bottom. The video with the camera (and waterproof housing) on the top of the pilot house made the boat heel quite a bit. Going to try for some more on board videos in the near future on my other boats.
Got the 4 minute YouTube link here:
I hope you enjoy it!
Lew! This is great!!!
When you have a moment can you post a picture of the rudder and prop set-up you've used Elena? Or is it in your harbor or build blog? I have a trawler in my future.
Many thanks!
👍
Nothing fancy about the prop and rudder. The rudder pivot axis is about 35% back from the leading edge. This way the rudder forces more of the prop back wash to the side to help the boat turn sharper.
Suncoast Scale Model Boat Club - March 1, 2026 meet
SSMBC - although a little windy, only four members showed up. The wonderful temperature and no rain was great. I decide to run my trawler, "Elena", which has not seen the pond in over five years. It handled the wind quite well and is perhaps my best operating boat for rough conditions. I know there is a limit with that much above the deck to catch the wind, but I must admit this was a very good run with a little challenge!
Ronald, the reason I built this boat with the nets up is I wanted it to show it in action. The net is loaded with fish and two men are working to bring the catch aboard. See photos.
Lew
Yes Dave, is was the Helen kit. I bought it (2016?) partially built (up to the deck) but had to rip it apart to get the big dead battery out.
Worst part was the entire hull was covered in masking tape for many years. What a pain it was to remove it. In the long run it worked out.
I renamed it "Elena" after my wife. It sits in our front room and is the first model one sees in our home. Still uses the old FM radio. Runs perfect as I have alluded to.
Lew
Finally our first meet of 2026! Very unusual weather for us, like the rest of the country. Normally we might miss 1 or 2 weekends during the winter season but this was our first meet since December.
This would have been a great perfect day was hampered by wind, a little much for many smaller boats. Also a lot of dead fish around the pond, probably caused by a lack of oxygen because of a lack of rain. We are in the middle of a drought, but it is supposed to rain tonight.
Hi Garth,
That's great, Love the Christmas decorations.
is that the naughty elf in the boat.
Hope he'smnot taking with out consent.
Out of curiosity, what model boat is that??
Actually it was a "no meet" meet. December 7 is "Pearl Harbor" remberence day in the US. So I was up to 3 AM Saturday night preparing my PT61 to bring it to the park. Weather was 40% chance of rain.
Up at 9, I packed everything and went to the park. Only a few droplets of rain followed by the sun coming out and no rain. I was the only one there.
Ironically, people must have been watching weather radar on their cell phones and decided not to go. Contrast that when, on December 7, 1941, radar was manned and the impending attack was misinterpreted somewhere along the line and the US defenses decided "not to go".
It would have been a good meet. No fun sailing alone. I wanted the '61 to get in the water where it hasn't been in quite a while. So, I am posting photos of the PT61 (1/20 scale, 47+ inches long) in my SUV. More next time.
Well, these photos tell me the conventional bow workboat with push knees is your build. So, I deduce that the second boat that caught my eye is also one of your builds. I would certainly be interested in build photos of both. Is the “cruiser” based on an actual 1:1?
Another meet with great weather. Perfect temperature with no wind at the start but a mild breeze came in for anyone sailing.
We had the docks (first time in many, many years). Going to work on a better and faster solution to fasten them together and use them more often.
Lew
Chum444, about the photo of the SSMBC docks. I am currently working on modifying these docks. I have a few more. Hope to be able to assemble them on land and slide them in the water as an assembly. I'll keep everyone posted on the details.
Lew
Absolutely stunning weather for this meet. It just doesn't get any better than this. After a long hot summer, the perfect day. No sweating, no rain, no clouds, no wind, just a gentle breeze. No bugs, snakes, gators, tourists.
Boats ran well, No need to have a rescue or get the long pole out. Perfect for scale model boaters (except for the guy that forgot his batteries.)
Hei Lew!
What a pond! We would love to have something like that, but the local council is thwarting our plans.
We wanted a little more inflow water, but even rainwater was not allowed. It could have been taken from the neighbouring houses at little expense and with little effort.
Let's see what happens...
There used to be three ponds for the mill further down. Unfortunately, the mills burned down completely in 1915. Oh well...
Greetings from Switzerland
Michel-C.
