This is my tug Alte Liebe. it is a Caldercraft kit and is almost 1 metre in length. I have installed an MFA 540 motor with a 2.5:1 reduction gear and operate her on 6 volt SLA's. With ballast she is fairly heavy coming in at about 15 kg.

I have just added a photo of my tug breaking the Ice on our lake a couple of weeks ago.(December 2012)

Just got back from lake and had some fun with my son. His Veron Swordsman that I bought from a second hand shop £30.00. Flew the Canadair again against a stunning sunset, and a shot of my Veron Fast Patrol Boat with its new motors (555's) running on 10v A123's, very scale speed but could do with a few more volts to really bring it on the plane.

Some photos of my Aerokits Sea Scout taken yesterday at Southport model boat lake. Fitted with an outrunner brushless motor.

Amelie is a 1:24 scale pilot cutter from the TV series the hungry sailors, scratch built from photographs of internet, lovely evening sail on bala lake.

MY 34 inch and 46 inch Aerokits Fireboats are readied for the lake. The 46 inch is covered elsewhere in the gallery but the 34 inch was recovered a couple of years ago from a hulk and fitted with a 220 watt 1050 kv bruhless motor. With a 10.8 NiMH and 40mm 3 blade brass prop it looks great on the water.

This is my 46 inch fireboat. it is a 1960s Aerokits model that I was given about 18 months ago only partly started (frames and stringers). it is powered by 2 x 770 watt brushless motors with 4s lips and has working monitors and an Action Noisy Thing sound system. it is pictured here at Tynemouth boating lake where I an a member to of the Tmbc.

Bought off ebay, where else! Had been started as a cruiser, with one very small electric motor,then put in a loft for goodness knows how many years.Replaced prop shaft with 2, 40mm r/h and l/h props, 2x 540 motors running through 40a esc.Radio is 27mhz. 2ch. would like to swap to 2ghz to get rid of the unsightly aerial! I am awaiting some plasticard windows to Improve the looks and will slowly add fittings as and when.I tend to sail it every now and again on the boating lake in BUXTON, no-one has shouted as yet,though I'm not sure the swans approve.!: The photo on the water was just as the power was running down, none as yet at speed.It is very manoeverable with the twin rudders,almost on the gunwhales at speed.

HI fellow modellers, Another model from the RADMC fleet at the fleetshaven workshop and boat yard in Ponthir.This model was scratch built using a fibre glass hull and plan obtained from a fellow modeller at the Bridgend Show in 2007. The front door and some fittings are made from plastic card and tube, decks are from ply and timber. On board figures are from the pound shop and car boot sales, modified by myself. The on board tank and half truck are RTR models that I have modified their looks to fit into a WWII theme for the craft. This craft has twin drive, 400 motors via 2.5/1 gearboxes. I tend to use both sticks on the TX for drive as this allows me to turn the model on a six pence.The dispatch door works from a rotary pot on the TX and via a rotary sail winch servo in the hull. I have just modified my Planet 5 TX to allow me to change my radio gear in this craft. This model has had meny trips on Cwmbran Boating Lake and at shows the society attend during the year. Still haven't allowed the tank or half track to run off the landing craft up the lake side slipway. one day I might get it on video. Hope you enjoyed the photo's. Regards GreyWolf

HI Fellow Modellers,
Another model from the RADMC fleet at the fleetshaven workshop and boat yard in Ponthir.This model was built from a Caldercraft Kit, This model came into my possession for the price of 20p, a raffle prize at Bryn Bach Model Clubs OPen Day 2010, when it was built is unknown. The item being made for display use and not finished off, no internal electronic fixtures. Did have a prop shaft and prop that had not been fitted correctly. 50% of all the fixtures had to be removed and refitted before they fell off, some didn't stay in place from the show back home. The model was finised off using a photo of the Milford star on the internet. The fish boxes and figures being obtained off DON one of the Society members who had a mould to make them in white metal, only required cleaning up and finishing off. A graupner 6 volt steam unit is fitted in the funnel and to make the boat a little more realistic on the water,a maplin steam sound system has been used to generate the sound of the engine. A simple mod allows the revs to be linked to the engine voltage. The drive motor is a 550 with the lowest revs I had in MJB's this was married up to a 2.5/1 gearbox I also had in stock. The main motor and steam unit are supplied from a 7.2 volt nicad racing pack. This model has had meny fishing trips on Cwmbran Boating Lake and at shows the Society visit. Hope you enjoy the pictures, Regards GreyWolf.

HI fellow Modellers,
Another model from the RADMC fleet at the fleetshaven workshop and boat yard in Ponthir.This model was built using a Billings Kit, bought for me as a Christmas pressent in 2009. A graupner 6 volt steam unit is fitted in the funnel and to make the boat a little more realistic a maplin steam sound system has been used to generate the sound of the engine. A simple mod allows the revs to be linked to the engine voltage. The steam engine rotates using a stripped down minI servo, fitted under the motor housing on the deck, again linked to the main motor voltage. The two 9.6 volt AA batteries and control gear are mounted under the boats floor, forward locker, a minI servo for steerage is fitted under the rear seat and the receiver is located under the wood pile. Figures are self made from items obtained from the local pound shop. The modal can be seen sailing at Cwmbran Boating Lake or at shows the society visit. Hope you enjoy the pictures, Regards GreyWolf.

Hi" I thought I would put my new rebuild on for all to see ! I found this old Marblehead yacht as a wreck. She was gathering dust in an old reclaim ferniture wherehouse whilst we were on holiday last summer. Been told the yacht had been originaly scratch built in 1950s from a plan. She took me about half a year to rebuild. New parts as follow hiteck sail arm winch with 18lbs of torque. New futaba servo for the rudder. New sails & booms rigs & fittings. New deck made from plank strip wood & varnished. Also finished in painted Ivery white. She sail well in lite to strong winds At my local boating lake at Sheringham Norfolk .
works well on a Spekrum DX5E But can work on any other 2 channal transmitter .
Hope you enjoy the photos .

HI Fellow Enthusiasts
Photo shows my RAF crash tender in the colours as it was when first built in 1956/57 from a kit. (Red tops like all fire engines, well I was only 9 at the time.) This photo was taken at lakeside in 1993 when I first joined the Cwmbran Modelling Society. The Second photo shows the boat on display at the Portis Head Open Day event in 2000 several modifications taking place to the overall look of the boat. in 2008/9 I decided for it's belated 50th. birthday to revamp the model and bring it closer to the real thing. Damage to the woodwork being repaired and a colour scheme close to that of the real boat being applied. Several new deck fittings being made along with new window surrounds made out of plastic replacing the cardboard ones fitted in 2000. New decals and correct flag also fitted. The model was entered in the 2010 society Chairmans Comp. winning joint first place with one of my other models. Photo 4 shows my model as she is to-day repaired once again ready to sail, after hitting some Ice over the christmas period 2010 resulting in a hole in the bow that almost caused her to sink.
The model over the 54 years it's been around has been fitted with single and twin electric drives and to day it has a single johnson 550 brushed electric drive via a 2.5/1 gear box run off two 7.2 volt racing packs in series. The torque generated being too great for standard plastic props resulting in me using 40mm three blade brass props. The motor controller is an electolize 15 amp unit and I also use one of their switch units to activate the water pump for the scratch built water cannons. The water pump being salvaged from a 1960's car washer system and still goes to-day.
Hope you enjoy the pic,s as much as Ive enjoyed this model over the last 50 years plus.
Regards
GreyWolf