Thames Fire Service fire boat,this has twin 540 motors,12v pumps(not working yet) and nav lights.Fibreglass hull with wood decks etc.
The model is quite old and has been a static for some time until it fell into my hands,the name Gamma on the bow.
Looks pretty much scratch built and a very good job whoever did it.
Sails occasionally at Gang Werily Fawley Hants.
This is another work in progress,hopefully we will make it to a fun-day maybe next year.

Thanks to all those that made suggestions about making the Suction Hoses, here are my efforts. The boat looks OK now thought there is much to do still. I am using two Johnson drill motors in paralell with one 50 amp ESC & 20A fuses in each motor + supply lead, all running on 8.4V NiMhi. the current props are 40 X 21 three blade. The boat is fast enough but battery life is short and the battery is very hot after the end of the run. I water cooled the motors and ESC. I will try some smaller props and 7,2V to see if there is an Improvement.

Hi,
I thought that my recently finished MTB may be of interest.
It consists of 49" GRP hull ply deck / superstructure. The fittings are from a mixture of ABS and metal, to give a good surface for spray painted finish.
The drive consists of twin 850 motors and twin 50mm brass props, controlled by a JetI Navy 600 on 10 cells, this setup gives excellent scale planing, but with 14 cells the performance is outstanding. I use 4600 capacity and only select the top power run in short bursts, which gives me around 20 minutes duration on one charge.
radio is 2,4 ghz so no bother waiting for a free freq.
hope you enjoy
loz.

I built this model from the astec mouldings semI kit
it has two monoperm motors in running off two 6 v
buggy packs twin shafts ewin rudders I bought plans
of original whaleback and modified it to suit the
hull and top the figures where modified 1/32 eighth
army multipose figures from airfix they had tin hats
and a captains hat in figures so not too much to
modify the guns where bought from nautical marine
models came as kits I think it didnt come out too bad

This is my Sea Hornet which was rescued from Ebay see photo 1. Gray (Froggyt996) recognised it as a Sea Hornet even with the hideous cabin attched which the prvious owner had made. Also see the propshaft angle in photo 1 - would this have ever worked? Gray again restored this for me, I wanted a mahogany boat which looked like an italian speedboat and this is what he did for me see photo 2. Photo 3 sees the Sea Hornet on the sea at Southsea just after the start of the Round Britain Race in 2008. The receiver battery failed and a very nice Lifeboat Man from Southsea happened to be watching me run the boat and rescued it when it stopped running. it was put in dry dock over this winter to be tidied up again after a couple of years constant use and photo 4 sees it with its 2 new screens, re-varnished and 2 new rubbing strake. it is powered by 2 Graupner Speed 600 motors, a Ripmax sea sprint watercooled speed controller and 2 x 3 blade prop shop props on 2 x light weight shafts. it is also filled with bouyancy foam it case the inevitable happens which makes it quite heavy. it is ran on 2 x 8.4 volts nicad sticks and gives me a running time of approx. 20 minutes with quite a good turn of speed.
Marie (alias Mrs Froggyt996)

here is my Fireboat after extensive testing of motors, batteries and props. Full details in "power set up".

Its about to have a gearbox fitted, this should enable me to fit a larger prop, and get longer run times, hopfully!

this boat started as a kingston mouldings hull of the
p28 fast patrol boat you get hull and plan the rest is up to the builder it is twin shafts twin rudders one speed controller a jel 6v 7amp battery AND two
545 motors

The boat is a scratch built and started life in the shed. it is a semiscale model at aprox 36inch, built with balsa wood.It is full remote control and fitted with two Mtroniks Vision 600 motors one 12volt 7ah battery,one seasprint esc.
It was built as a fun boat so I could sail with my friend Peter thomas with his variuos boats.
Several things have now been added since this boat was first built, IE smoking stacks, fireing torpedoes and magnetic pickups for colecting them. Also has working radar/moving gun + a home built bec.
Flag poles and flags/compas has been added on the superstructure.
Each motor draws 6amps at full power, I have measured the speed from one point to another at a spacing of 60mtrs, and timed at 15 seconds, but this is a bit fast for this boat as she starts to plane out of the water.
We sail her at New Brighton lake on the wirral most wednesdays. As the weather is now a bit cool I have just purchased a simular model to this at 1:48 scale 110ft island class USCG Patrol boat so I can look at them both in action when the weather picks up. Anyone wanting info can contact me via this website.

Here is a video of our boat (Vigilant star) sailing at New Brighton boat lake on the wirral every Wednesday.

The boat is a semiscale (Coast Guard Cutter), designed by Hal-Harrison in Marine Modelling. I have doubled its size and put two 540/1 Mfa motors in, driving quanta 45mm props. She is 36" length 8" Bow, runs of one 12 volt 7Ah SLA battery.

It is made from Balsa/Fibreglass resin. Runs well no leaks to date. Gerry.

this boat has twin shafts two 777 motors twin mfa
esc twin rudders and two 7.2v buggy packs yet to
be tryed on lake as it is drained for cleaning

Built using the Aerokits plans and information from the original Air Ministry build spec.

Boat is 1/16th scale - twin motors with a mixer.

This tug is in scale 1:25, used two 900 motors. Still need a lot of details. Models are based on my own fiberglass hull