Photos & videos
Search results
2,041 posts · Page 12 of 171The Bermuda rigged "Slim Nip 2" was a natural progression from my recent uni rigged "Slim Nip"
I just had to explore how an extended (76cm) Bermuda rigged hull would look and sail ?.
Length - 760mm , Beam - 170mm , Mast - 1100mm (Deck to top).
Other Wee Nip videos for ref. No.42 No.164 No.205 plus many more here on RCSailing
- RogerA1Warrant OfficerShe look really good. If she was mine I would try the following idea. Lower the jib boom closer to the deck, add a bit more camber into the sails and open the slot up between the jib and the main and the jib when the sails are pulled in.
Just my thoughts enjoy sailing her - philcaretakerCommodoreHi Roger , all noted. I did put on an adjustable jib rack expecting to have "juggle" positions. With the weather starting to improve hopefully I can spend a bit more time working on the finer points. Someone once said to me , "you can get anything to sail , but its more difficult to get it to sail well" - How very true !!!!.
cheers
Phil
I’ve contact with old sailers of this tug, and they are follow me in Holland, and have a lot of information of these 1800 serie build Tugs, in that time,….
Now i’ve testing the lights and sound.
Tug is still under construction,…
- figtree7ntsAdmiralHi Albert90,
Your Smit Nederland is superbly built, and I love the sound system!
Pity we're so far away from each other?
As, I'd love to do some tug boating competition with you?
Also, Thanks for pointing out the wrong lighting on my mast!
Regards,
Ed-Liked by Albert90
Using ESP8266
- dave976CaptainHi NickD
Good info from RNinMunich and probably not generally known.
I would switch on the Bluetooth before your Tx and all should be ok as the Tx (certainly those of recent manufacture) should avoid using the channels selected by your Bluetooth device.
All devices use Frequency Hopping and use a shared map of hop times and frequencies between devices to identify heavily used channels and avoid. This is the binding process.
The info is constantly monitored and regularly updated to allow for new transmissions.
That being the case both should work without issue but as ToraDog says I would not wish to use the Bluetooth device on a critical control.
dave976Liked by RNinMunich and River Rat and - jbkiwiFleet AdmiralHi Nick, I use BT music players in a couple of my boats, as well as a remote key fob (433mhz) operated engine sound start relay, and have no problems with either. BT Doesn't have a great range (around 40ft on the water) but if you are just using it for an effect which for close up it should be fine. Bench testing will tell if it will affect your set-up (range test outside etc).
I've used it from my watch to the boat, the small Ruizu player to the boat, the Ruizu player in the boat to the BT board/player, for music and radio - aerial on the boat is functional for the radio, (aerial to Ruizu player to board via BT) all BT board functions (including music from an SD card ) controlled by an ifrared remote- pic 4), from the Ruizu player to a BT speaker in the boat and from Ruizu player in the boat to the BT speaker. No problems so far.
JBLiked by dave976 and Mike Stoney and
- MouldBuilderAdmiralLooking fantastic Graham. Now are you glad that you kept the matches in your pocket.😬😬Liked by Graham93
- Colin HFleet AdmiralThat speed looks so much more realistic to how I used to enjoy real touring in my kayak as a younger fitter lad.
Regular trips from Leicester to Skegness by kayak, and collected by my dad for return trip. 3 days out 2 hours return.
Thanks for reminding me of my youth.
Cheers Colin.
- johnfMidshipmanHi Rogal,
Many thanks for the photos - a really impressive model!!
Each to his own, but I much prefer small water craft modelled to 1\24, 1\16 or even 1\12 scale - rather than far larger ships unavoidably modelled on a tiny scale.
With best wishes. Dr John F. Leeds and Bradford. MBC. 😊😊😊
https://model-boats.com/blogs/111166
Quote from blog :-
"The paddling action is produced with a combination of mechanics and software control. A few changes were made to the software to improve the ability to steer. There is still more to be done to improve this. If you watch carefully at 0:35 seconds in the video, you can see the rudder compensating for the paddle stroke to help keep Katie moving in a straight line."
- philcaretakerCommodoreShe gets better every time Graham takes her out ! - I think Bill & Ben may get jealous !!.
Just for information , some interesting video grabs .Liked by hermank and Mike Stoney and - jbkiwiFleet AdmiralLooking brilliant, definite improvement on the first test. She's going to improve with a few paddling 'lessons' Great vids Phil, you're really doing a fantastic job capturing everyones' work,- looking very professional.
JBLiked by GaryLC and pressonreguardless and
NOTE :- Look out for the collision !! (around 0.30 seconds into the video). - thankfully no major damage. And the rescue right at the end !.
- MouldBuilderAdmiralSorry to hear about the mess the storm has left behind JB. I hope that damage to your house is minimal and that your estuary returns to normal soon. I remember you saying recently that the summer had not been so good and then this!☹️Liked by jbkiwi
A challenge for R/C steam nuts😁
JB
- figtree7ntsAdmiralOutstanding!!! I've never seen anything like it!
It would be an awesome model steamboat!
Cheers,
Ed-Liked by jbkiwi
Best wishes to all for the Christmas and the new year !.
You are welcome to visit us soon ! ⛵🚤
https://model-boats.com/places/60518