Bought this from a charity shop in Gillingham. Put in new prop shaft motor and servo's etc. She is a very heavy boat and sits a little low in the water, want to use it for the lights on the lake events eventually.

HMS Nelson, scratchbuilt to 1/8" scale. Powered by two motors driving twin contrarotating shafts with three blade props. She sails on Lake Lisgar, Tillsonburg, Ontario.
I decided on Nelson as she took part in Operation Pedestal, from which I made a 1/216" waterline model of SS Ohio, the ship that saved Malta.
She took a little over 600 hours from solid chunk of basswood to launch. Probably info collection took as long!

Guess most of you have heard of the Khetanna, Jabba The Hut's sail barge from Star Wars. I looked around on the net and to my big surprise, the search engines did not spit out radio controlled versions of this model. Which made me think, and then decide to built my own.
It is scratch build, based on a "scudder" hull, a design by Glenn G. I printed a few pictures of Khetanna from the net and used those for guidance in the process.
The superstructure is a combination of balsa and ply wood. in the Star Wars tradition, the boat is propelled by a jet propelled engine. To finish it off, a Lego version of Jabba was added for extra detail.
It was a fun and fast project to built, maybe a dozen or so evenings.
(scratch) building is my passion and only sail the boats with my son about once a month. We've got a pond near Newcastle (AUS) harbour which is pretty good (providing there's no weed in it) but the disadvantage of this pond is salt water, meaning a proper rinse of the models is needed after each sailing session. Recently we have moved our sailing sessions as well to the liberty pond in town. The model captures the audience, the vast majority recognize the Khetanna immediately.
Happy sailing.

Jeroen

A few pics of my partly scratch build RTTL from Kitshack. Picked this up from Ebay as a first kit.
Has a few printed balsa hullparts but lots of templates to cut out. Plans also show lots of topside details.
Powered orignally by 2 MFA 500's and 2 7.2 NiMH with 35mm props, OK but run time poor.
Complete change, 2 400's and downsized to 25mm props, much better run time and good on the plane.
Next upgrade is to LiPo batteries.

Next build is likely to be an Aerokits Sea Hornet or Sea Breeze.

This is my newest project an Ebay buy of a delapidated HSL possibly used to advertise Model boat insurance at some time maybe 50 years old !. I have removed all broken, out of scale and incorrect items, removed old repairs and internal engine mounts. Superstructure is not too accurate but good enough to keep. I have noticed the keel is slightly twisted so will have to try and rectify that and the rear deck is going to be removed also as the adhesive is soft and pliable and there is no rigidity in the build aft of the superstructure. I intend fitting 2 x 12v johnson 600 type brushed motors as the original had 2 props. I have plenty of photos of the external layout but lack any detail of the open bridge 😟 . I think this will be a difficult project to complete hope I do it justice

This is a 30-inch static model of the trawler that had suffered damage and had most of the deck fittings missing when I got a hold of it.
It was 'de-constructed' by Victor Marcham of the Mablethorpe Model RC Boat Group. Being a static model, it had to be bored through to fit a propshaft, a motor and rudder, and had new decking, mast and working LED lights.
It has yet to be weighted so pond trials can begin.

First time in the water and under power. to get the correct trim (ect) I built a test tank from ply and lined it with polythene. To stat with There were two 12V lead acid batteries and the weight of the two motors, she just simply sat there, even the props were above water. After approx 30lbs more weight the correct water line was reached, the white line on the hull follows the sheer line of the main deck and isn't the true water line. So with the two batteries hooked up in parallel, the 12V Proboat Speed controller and the two Duma 12V motors as can be seen quite a good performance.

Completely scratch built using balsa wood and Mahogany strips for the decks and bridge and the free plan by James Pottinger issued in Model Boat Magazine November 1996. The plans were well drawn at a scale of 1:93 how ever I doubled the size by just transfering each measurement directly onto the wood and a few card patterns were made when panneling the hull.
Powered with twin 12 volt motors, two 12 volt lead acid batteries and two 1 3/4" props I am well sattisfied with the end result. A full build log with pictures can be found on the ''Leith built Ships" web site, or look under ''The Loftsman"

Following burning out the motor by fouling the prop on a polythene bread wrapper I fitted a new 160 amp speed controller and got a bargain motor from Giant Shark. it is an Emax GT4020 which cost about £14. I realised what a bargain it was and went back only to find Giant Shark have ceased trading. The video shows the boat running on a 4 cell Lipo, it goes a bit quicker on a 5 cell that I have. I am really sold on Lipo power as Dave said I would be. I have just ordered a 3 cell Lipo for my crash tender

here are some photos of finished project on the water at pickie pool bangor she is powered by 540 motor and 60mm prop winch radar lights al in working order she tows the net well stacks of power
this boat is scratch built inc winch rgds Robert waterson angus

Sea Queen aka MALLARD
I built it from a kit a few years back sold it then bought it back to do a refit & new paint job
MFA 850 torpedo Motor 3 blade brass prop it runs on a 12v Battery it is now with my nephews son in Northallerton

scratchbuilt from ply and balsa wood powered by two Caldercraft 750 motors to 40mm props only took about three months to build as a winter project its not perfect but was never meant to be more than a toy, 54 inches long and gives a good response in speed and handling