Smit Rotterdam 478

Started by sandkb

23 updates 75 likes 18 comments

Smit Rotterdam 478

I've started building this Billings kit laid the keel in 2007 ! But until last year it has been in storage due to other builds. Mainly RC model aircraft. I will post some photos of the build during the past year or so to catch up. I'll then post progress more slowly as I go along.
Liked by Rod and Dave M

Sign in to comment on this update.

Planking the Hull

More pics of the hull planking progress during the last year.
Liked by Brightwork and tonyp and
3 comments
  1. sandkb
    Chief Petty Officer 2nd Class
    Various wood used ie, Ramin, Mahogani, Annegre, Veneer ply, Balsa. Strip planking is Obechi. Glues used: Cyno, Aliphatic wood glue where sanding required and where strength and waterproof glue is required I've used EpiGlue two pot Marine glue. The planking is used because of the many difficult shapes and curves of the hull construction. Once the sanding and shaping of the hull is completed the hull will be sheathed with a fibreglass cloth skin and resin then sanded smooth and spray painted replicating the steel hull of this vessel. Cheers, Kevin
    Liked by cenbeth and Dave M
  2. Dave M
    Vice Admiral
    Thanks for the update Kevin
    Descriptions with pics help new and aspiring modellers to perhaps start building.
    Our members have a wealth of information and are very good at providing solutions or help.
    Dave

Sign in to comment on this update.

Planking the hull.

Timber hull construction finished. Now the sanding and filling of imperfections to prepare for the next stage which will be the application of a fibreglass cloth skin to waterproof the hull and obtain a steel-plated like finish.
Liked by Brightwork and tonyp and

Sign in to comment on this update.

Delete this post?

It will be removed from the site.

Discard this draft?

Your draft will be deleted and cannot be recovered.

You have an unfinished draft

What would you like to do with it?