Taycol supermarine dimensions.
General dimensions and instructions here - http://eezebilt.tk/Documents.html
Taycol supermarine dimensions.
Taycol supermarine dimensions.
Sorry Doug, must need new specs, the mounting holes will be on a slotted base plate to allow for final adjustment for and aft. So any dimensions that change should be okay.
Cheers Colin.
Cheers Colin.
Fair winds and calm waters,
COLIN.
COLIN.
Liked by RNinMunich
Taycol supermarine dimensions.
Hi Colin, I measured on your motor and it's 1&1/4 inches as specified.
(Did mention that in my post!)
The length between mounting hole centres may vary slightly from original spec, depending on the new bearing bushes I'm fitting.
Can't measure that until I have it reassembled.
I'm nearly back up to speed now so will start the reassembly shortly.
Cheers, Doug 😎
(Did mention that in my post!)
The length between mounting hole centres may vary slightly from original spec, depending on the new bearing bushes I'm fitting.
Can't measure that until I have it reassembled.
I'm nearly back up to speed now so will start the reassembly shortly.
Cheers, Doug 😎
Young at heart 😉 Slightly older in other places.😊 Cheers Doug
Liked by cumbrae
Taycol supermarine dimensions.
The picture and details Doug posted were useful but the important dimension for the centre line of the shaft above mounting base line isn't quite clear enough to read. Any one got a clearer copy of the details list they could post on here would be appreciated.
Cheers Colin.
Cheers Colin.
Fair winds and calm waters,
COLIN.
COLIN.
Liked by
Loading…